edge map: +177.54.154.0/24 Singapore (AS396356 Latitude.sh)

Register dRPC edge prefix 177.54.154.0/24 so the request-split receiver can classify Singapore (asia-southeast) traffic from the Latitude.sh gateway.
2026-07-09 12:48:14 +00:00
497 changed files with 4707 additions and 82649 deletions
--- a/.gitignore
+++ b/.gitignore
@@ -11,7 +11,3 @@ peer-backups/
 snapshots/
 *.bak
 *.swp
-
-# Task C local peer capture state
-peer-state/
-
--- a/accesslog-shipper.awk
+++ b/accesslog-shipper.awk
@@ -1,18 +0,0 @@
-# Streams dshackle access-log lines unchanged, and every 1000 lines OR 30s
-# injects a __shipstat__ checkpoint carrying the cumulative sent-count for this
-# connection. The splits cruncher (claude host) filters these OUT of event
-# processing and uses them to reconcile shipped-vs-ingested per gateway per hour
-# — the completeness signal the time-based floor cannot see (event-loss-by-
-# rotation, 2026-07-10). `sess` = connection-start epoch so the cruncher detects
-# counter resets on shipper reconnect (retry loop resumes at file END).
-BEGIN { sess = systime(); last = sess; n = 0 }
-{
-    n++
-    print
-    now = systime()
-    if (n % 1000 == 0 || now - last >= 30) {
-        printf "{\"__shipstat__\":1,\"sess\":%d,\"sent\":%d,\"ts\":%d}\n", sess, n, now
-        fflush()
-        last = now
-    }
-}
--- a/apply-dshackle-overrides.py
+++ b/apply-dshackle-overrides.py
@@ -1,143 +0,0 @@
-#!/usr/bin/env python3
-"""apply-dshackle-overrides.py - weave HOST-LOCAL dshackle upstream overrides into
-the generated main_configs/*.yaml so they survive every configure-drpc regeneration.
-
-Override file (NOT in the repo - host-local, like rpc-local/compose.d):
-    /root/rpc-local/dshackle-overrides.yaml
-
-Schema (match by upstream id OR by chain; id wins):
-    upstreams:
-      uk-4-base-mainnet-op-reth-pruned:        # or e.g. "chain:base"
-        method_groups_disabled: [trace, debug] # removed from enabled, added to disabled
-        methods_disabled: [eth_getFilterLogs]  # per-method disables (methods.disabled)
-        options:
-          disable-validation: true             # merged into upstream options
-
-Rationale: heavy methods at flat per-call pay poison the chain's latency scoring
-(operator method-eviction rule 2026-07-10; see method-economics.py). The disable
-decision is local to the gateway's market, so the config lives on the gateway.
-
-Called by reload_dshackle.sh before signaling dshackle - i.e. re-applied on every
-ansible config push. NOTE: dshackle only re-reads upstream method lists on RESTART;
-this keeps the on-disk config permanently correct, the next restart activates it.
-Idempotent. Silent no-op when the override file is absent.
-"""
-import glob
-import os
-import sys
-
-import yaml
-
-OVERRIDES = '/root/rpc-local/dshackle-overrides.yaml'
-CONFIG_DIR = '/root/rpc/main_configs'
-
-
-def apply(upstream, ov):
-    changed = False
-    mg = upstream.setdefault('method-groups', {}) or {}
-    for grp in ov.get('method_groups_disabled') or []:
-        en = mg.get('enabled') or []
-        if grp in en:
-            en.remove(grp)
-            mg['enabled'] = en
-            changed = True
-        dis = mg.get('disabled') or []
-        if grp not in dis:
-            dis.append(grp)
-            mg['disabled'] = dis
-            changed = True
-    if mg:
-        upstream['method-groups'] = mg
-    for meth in ov.get('methods_disabled') or []:
-        methods = upstream.setdefault('methods', {}) or {}
-        dis = methods.get('disabled') or []
-        if not any((d.get('name') if isinstance(d, dict) else d) == meth for d in dis):
-            dis.append({'name': meth})
-            methods['disabled'] = dis
-            upstream['methods'] = methods
-            changed = True
-    for k, v in (ov.get('options') or {}).items():
-        opts = upstream.setdefault('options', {}) or {}
-        if opts.get(k) != v:
-            opts[k] = v
-            upstream['options'] = opts
-            changed = True
-    return changed
-
-
-ENVFILE = '/root/rpc/.env'
-
-
-def env_overrides():
-    """Chain-level overrides from .env (rendered from host_vars env_overrides):
-        DSHACKLE_<CHAIN>_METHOD_GROUPS_DISABLED=trace,debug
-        DSHACKLE_<CHAIN>_METHODS_DISABLED=eth_getFilterLogs
-    <CHAIN> = dshackle chain name, upper, '-' -> '_' (e.g. BASE, ETH_BEACON_CHAIN)."""
-    spec = {}
-    if not os.path.exists(ENVFILE):
-        return spec
-    import re as _re
-    for line in open(ENVFILE):
-        m = _re.match(r'DSHACKLE_([A-Z0-9_]+)_(METHOD_GROUPS|METHODS)_DISABLED=(.*)', line.strip())
-        if not m:
-            continue
-        chain = m.group(1).lower().replace('_', '-')
-        key = 'method_groups_disabled' if m.group(2) == 'METHOD_GROUPS' else 'methods_disabled'
-        vals = [v.strip() for v in m.group(3).split(',') if v.strip()]
-        if vals:
-            spec.setdefault(f'chain:{chain}', {}).setdefault(key, []).extend(vals)
-    return spec
-
-
-def main():
-    spec = env_overrides()
-    if os.path.exists(OVERRIDES):
-        for k, v in ((yaml.safe_load(open(OVERRIDES)) or {}).get('upstreams') or {}).items():
-            cur = spec.setdefault(k, {})
-            for kk, vv in (v or {}).items():
-                if isinstance(vv, list):
-                    cur[kk] = sorted(set((cur.get(kk) or []) + vv))
-                else:
-                    cur.setdefault(kk, vv)
-    if not spec:
-        return
-    total = 0
-    for path in glob.glob(os.path.join(CONFIG_DIR, '*.yaml')):
-        try:
-            doc = yaml.safe_load(open(path))
-        except yaml.YAMLError:
-            continue
-        if not isinstance(doc, dict) or 'upstreams' not in doc:
-            continue
-        changed = False
-        for up in doc['upstreams'] or []:
-            if not isinstance(up, dict):
-                continue
-            ov = spec.get(up.get('id')) or spec.get(f"chain:{up.get('chain')}")
-            if ov and apply(up, ov):
-                changed = True
-        if changed:
-            text = yaml.safe_dump(doc, default_flow_style=False, sort_keys=False)
-            # dshackle silently refuses to hot-reload configs containing TABS
-            # (operator gotcha 2026-07-10) - fail loudly, never write a tabbed file.
-            if '\t' in text:
-                print(f'dshackle-overrides: REFUSING to write {path} - tab in output')
-                continue
-            with open(path, 'w') as f:
-                f.write(text)
-            total += 1
-            print(f'dshackle-overrides: rewove {path}')
-    # tab audit on ALL configs (even unchanged): a tabbed file silently fails
-    # dshackle's hot-reload, so disk and running state diverge invisibly.
-    for path in glob.glob(os.path.join(CONFIG_DIR, '*.yaml')):
-        try:
-            if '\t' in open(path, errors='replace').read():
-                print(f'dshackle-overrides: WARNING {path} contains TABS - dshackle will SILENTLY skip reloading it')
-        except OSError:
-            pass
-    if total:
-        print(f'dshackle-overrides: {total} file(s) rewoven (dshackle hot-reloads on the HUP that follows)')
-
-
-if __name__ == '__main__':
-    main()
--- a/arb/nitro/connext-sepolia-nitro-archive-leveldb-hash.yml
+++ b/arb/nitro/connext-sepolia-nitro-archive-leveldb-hash.yml
@@ -116,7 +116,7 @@ x-upstreams:
          frameSize: 20Mb
          msgSize: 50Mb
          url: $${WS_URL}
-    chain:
+    chain: everclear-sepolia
    method-groups:
      enabled:
        - debug
--- a/arb/nitro/connext-sepolia-nitro-pruned-pebble-path.yml
+++ b/arb/nitro/connext-sepolia-nitro-pruned-pebble-path.yml
@@ -117,7 +117,7 @@ x-upstreams:
          frameSize: 20Mb
          msgSize: 50Mb
          url: $${WS_URL}
-    chain:
+    chain: everclear-sepolia
    method-groups:
      enabled:
        - debug
--- a/arb/nitro/robinhood-mainnet-nitro-archive-pebble-hash.yml
+++ b/arb/nitro/robinhood-mainnet-nitro-archive-pebble-hash.yml
@@ -1,143 +0,0 @@
---
-x-logging-defaults: &logging-defaults
-  driver: json-file
-  options:
-    max-size: "512m"
-    max-file: "2"
-
-# Usage:
-#
-# mkdir rpc && cd rpc
-#
-# git init
-# git remote add origin https://github.com/StakeSquid/ethereum-rpc-docker.git
-# git fetch origin vibe
-# git checkout origin/vibe
-#
-# docker run --rm alpine sh -c "printf '0x'; head -c32 /dev/urandom | xxd -p -c 64" > .jwtsecret
-#
-# env
-# ...
-# IP=$(curl ipinfo.io/ip)
-# DOMAIN=${IP}.traefik.me
-# COMPOSE_FILE=base.yml:rpc.yml:arb/nitro/robinhood-mainnet-nitro-archive-pebble-hash.yml
-#
-# docker compose up -d
-#
-# curl -X POST https://${IP}.traefik.me/robinhood-mainnet-archive \
-#   -H "Content-Type: application/json" \
-#   --data '{"jsonrpc":"2.0","method":"eth_blockNumber","params":[],"id":1}'
-
-services:
-  robinhood-mainnet-archive:
-    image: ${ROBINHOOD_NITRO_IMAGE:-offchainlabs/nitro-node}:${ROBINHOOD_MAINNET_NITRO_VERSION:-v3.11.2-3599aca}
-    sysctls:
-      # TCP Performance
-      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
-      net.ipv4.tcp_no_metrics_save: 1             # Disable metrics cache
-      net.ipv4.tcp_rmem: 4096 87380 16777216      # Increase TCP read buffers
-      net.ipv4.tcp_wmem: 4096 87380 16777216      # Increase TCP write buffers
-      net.core.somaxconn: 32768                   # Higher connection queue
-      # Memory/Connection Management
-      # net.core.netdev_max_backlog: 50000          # Increase network buffer
-      net.ipv4.tcp_max_syn_backlog: 30000         # More SYN requests
-      net.ipv4.tcp_max_tw_buckets: 2000000        # Allow more TIME_WAIT sockets
-    ulimits:
-      nofile: 1048576    # Max open files (for RPC/WS connections)
-    user: root
-    expose:
-      - 8545
-    command:
-      - --conf.file=/config/baseConfig.json
-      - --execution.caching.archive=true
-      - --execution.caching.database-cache=${ROBINHOOD_MAINNET_NITRO_ARCHIVE_PEBBLE_HASH_DATABASE_CACHE:-2048}
-      - --execution.caching.snapshot-cache=${ROBINHOOD_MAINNET_NITRO_ARCHIVE_PEBBLE_HASH_SNAPSHOT_CACHE:-400}
-      - --execution.caching.trie-clean-cache=${ROBINHOOD_MAINNET_NITRO_ARCHIVE_PEBBLE_HASH_TRIE_CLEAN_CACHE:-600}
-      - --execution.caching.trie-dirty-cache=${ROBINHOOD_MAINNET_NITRO_ARCHIVE_PEBBLE_HASH_TRIE_DIRTY_CACHE:-1024}
-      - --execution.forwarding-target=https://rpc.mainnet.chain.robinhood.com
-      - --execution.rpc.filter-log-cache-size=${ROBINHOOD_MAINNET_NITRO_ARCHIVE_PEBBLE_HASH_FILTER_LOG_CACHE:-32}
-      - --execution.rpc.gas-cap=5500000000
-      - --execution.rpc.log-history=0
-      - --execution.sequencer.enable=false
-      - --http.addr=0.0.0.0
-      - --http.api=eth,net,web3,arb,txpool,debug
-      - --http.corsdomain=*
-      - --http.port=8545
-      - --http.vhosts=*
-      - --metrics
-      - --metrics-server.addr=0.0.0.0
-      - --metrics-server.port=6070
-      - --node.batch-poster.enable=false
-      - --node.feed.input.url=wss://feed.mainnet.chain.robinhood.com
-      - --node.sequencer=false
-      - --node.staker.enable=false
-      - --parent-chain.blob-client.beacon-url=${ETHEREUM_MAINNET_BEACON_REST}
-      - --parent-chain.connection.url=${ETHEREUM_MAINNET_EXECUTION_RPC}
-      - --persistent.chain=/root/.arbitrum/robinhood-mainnet-archive
-      - --persistent.db-engine=pebble
-      - --ws.addr=0.0.0.0
-      - --ws.origins=*
-      - --ws.port=8545
-    restart: unless-stopped
-    stop_grace_period: 5m
-    networks:
-      - chains
-    volumes:
-      - ${ROBINHOOD_MAINNET_NITRO_ARCHIVE_PEBBLE_HASH_DATA:-robinhood-mainnet-nitro-archive-pebble-hash}:/root/.arbitrum
-      - ./arb/robinhood/mainnet:/config
-      - /slowdisk:/slowdisk
-    logging: *logging-defaults
-    labels:
-      - prometheus-scrape.enabled=true
-      - prometheus-scrape.port=6070
-      - prometheus-scrape.path=/debug/metrics/prometheus
-      - traefik.enable=true
-      - traefik.http.middlewares.robinhood-mainnet-nitro-archive-pebble-hash-stripprefix.stripprefix.prefixes=/robinhood-mainnet-archive
-      - traefik.http.services.robinhood-mainnet-nitro-archive-pebble-hash.loadbalancer.server.port=8545
-      - ${NO_SSL:-traefik.http.routers.robinhood-mainnet-nitro-archive-pebble-hash.entrypoints=websecure}
-      - ${NO_SSL:-traefik.http.routers.robinhood-mainnet-nitro-archive-pebble-hash.tls.certresolver=myresolver}
-      - ${NO_SSL:-traefik.http.routers.robinhood-mainnet-nitro-archive-pebble-hash.rule=Host(`$DOMAIN`) && (Path(`/robinhood-mainnet-archive`) || Path(`/robinhood-mainnet-archive/`))}
-      - ${NO_SSL:+traefik.http.routers.robinhood-mainnet-nitro-archive-pebble-hash.rule=Path(`/robinhood-mainnet-archive`) || Path(`/robinhood-mainnet-archive/`)}
-      - traefik.http.routers.robinhood-mainnet-nitro-archive-pebble-hash.middlewares=robinhood-mainnet-nitro-archive-pebble-hash-stripprefix, ipallowlist
-
-volumes:
-  robinhood-mainnet-nitro-archive-pebble-hash:
-
-x-upstreams:
-  - id: $${ID}
-    labels:
-      provider: $${PROVIDER}
-    connection:
-      generic:
-        rpc:
-          url: $${RPC_URL}
-        ws:
-          frameSize: 20Mb
-          msgSize: 50Mb
-          url: $${WS_URL}
-    chain: robinhood
-    method-groups:
-      enabled:
-        - debug
-        - filter
-    methods:
-      disabled:
-      enabled:
-        - name: txpool_content # TODO: should be disabled for rollup nodes
-        # standard geth only
-        - name: debug_getRawBlock
-        - name: debug_getRawTransaction
-        - name: debug_getRawReceipts
-        - name: debug_getRawHeader
-        - name: debug_getBadBlocks
-        # non standard geth only slightly dangerous
-        - name: debug_intermediateRoots
-        - name: debug_dumpBlock
-        # standard geth and erigon
-        - name: debug_accountRange
-        - name: debug_getModifiedAccountsByNumber
-        - name: debug_getModifiedAccountsByHash
-        # non standard geth and erigon
-        - name: eth_getRawTransactionByHash
-        - name: eth_getRawTransactionByBlockHashAndIndex
-...
--- a/arb/nitro/robinhood-testnet-nitro-archive-pebble-hash.yml
+++ b/arb/nitro/robinhood-testnet-nitro-archive-pebble-hash.yml
@@ -1,143 +0,0 @@
---
-x-logging-defaults: &logging-defaults
-  driver: json-file
-  options:
-    max-size: "512m"
-    max-file: "2"
-
-# Usage:
-#
-# mkdir rpc && cd rpc
-#
-# git init
-# git remote add origin https://github.com/StakeSquid/ethereum-rpc-docker.git
-# git fetch origin vibe
-# git checkout origin/vibe
-#
-# docker run --rm alpine sh -c "printf '0x'; head -c32 /dev/urandom | xxd -p -c 64" > .jwtsecret
-#
-# env
-# ...
-# IP=$(curl ipinfo.io/ip)
-# DOMAIN=${IP}.traefik.me
-# COMPOSE_FILE=base.yml:rpc.yml:arb/nitro/robinhood-testnet-nitro-archive-pebble-hash.yml
-#
-# docker compose up -d
-#
-# curl -X POST https://${IP}.traefik.me/robinhood-testnet-archive \
-#   -H "Content-Type: application/json" \
-#   --data '{"jsonrpc":"2.0","method":"eth_blockNumber","params":[],"id":1}'
-
-services:
-  robinhood-testnet-archive:
-    image: ${ROBINHOOD_NITRO_IMAGE:-offchainlabs/nitro-node}:${ROBINHOOD_TESTNET_NITRO_VERSION:-v3.11.2-3599aca}
-    sysctls:
-      # TCP Performance
-      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
-      net.ipv4.tcp_no_metrics_save: 1             # Disable metrics cache
-      net.ipv4.tcp_rmem: 4096 87380 16777216      # Increase TCP read buffers
-      net.ipv4.tcp_wmem: 4096 87380 16777216      # Increase TCP write buffers
-      net.core.somaxconn: 32768                   # Higher connection queue
-      # Memory/Connection Management
-      # net.core.netdev_max_backlog: 50000          # Increase network buffer
-      net.ipv4.tcp_max_syn_backlog: 30000         # More SYN requests
-      net.ipv4.tcp_max_tw_buckets: 2000000        # Allow more TIME_WAIT sockets
-    ulimits:
-      nofile: 1048576    # Max open files (for RPC/WS connections)
-    user: root
-    expose:
-      - 8545
-    command:
-      - --conf.file=/config/baseConfig.json
-      - --execution.caching.archive=true
-      - --execution.caching.database-cache=${ROBINHOOD_TESTNET_NITRO_ARCHIVE_PEBBLE_HASH_DATABASE_CACHE:-2048}
-      - --execution.caching.snapshot-cache=${ROBINHOOD_TESTNET_NITRO_ARCHIVE_PEBBLE_HASH_SNAPSHOT_CACHE:-400}
-      - --execution.caching.trie-clean-cache=${ROBINHOOD_TESTNET_NITRO_ARCHIVE_PEBBLE_HASH_TRIE_CLEAN_CACHE:-600}
-      - --execution.caching.trie-dirty-cache=${ROBINHOOD_TESTNET_NITRO_ARCHIVE_PEBBLE_HASH_TRIE_DIRTY_CACHE:-1024}
-      - --execution.forwarding-target=https://rpc.testnet.chain.robinhood.com
-      - --execution.rpc.filter-log-cache-size=${ROBINHOOD_TESTNET_NITRO_ARCHIVE_PEBBLE_HASH_FILTER_LOG_CACHE:-32}
-      - --execution.rpc.gas-cap=5500000000
-      - --execution.rpc.log-history=0
-      - --execution.sequencer.enable=false
-      - --http.addr=0.0.0.0
-      - --http.api=eth,net,web3,arb,txpool,debug
-      - --http.corsdomain=*
-      - --http.port=8545
-      - --http.vhosts=*
-      - --metrics
-      - --metrics-server.addr=0.0.0.0
-      - --metrics-server.port=6070
-      - --node.batch-poster.enable=false
-      - --node.feed.input.url=wss://feed.testnet.chain.robinhood.com
-      - --node.sequencer=false
-      - --node.staker.enable=false
-      - --parent-chain.blob-client.beacon-url=${ETHEREUM_SEPOLIA_BEACON_REST}
-      - --parent-chain.connection.url=${ETHEREUM_SEPOLIA_EXECUTION_RPC}
-      - --persistent.chain=/root/.arbitrum/robinhood-testnet-archive
-      - --persistent.db-engine=pebble
-      - --ws.addr=0.0.0.0
-      - --ws.origins=*
-      - --ws.port=8545
-    restart: unless-stopped
-    stop_grace_period: 5m
-    networks:
-      - chains
-    volumes:
-      - ${ROBINHOOD_TESTNET_NITRO_ARCHIVE_PEBBLE_HASH_DATA:-robinhood-testnet-nitro-archive-pebble-hash}:/root/.arbitrum
-      - ./arb/robinhood/testnet:/config
-      - /slowdisk:/slowdisk
-    logging: *logging-defaults
-    labels:
-      - prometheus-scrape.enabled=true
-      - prometheus-scrape.port=6070
-      - prometheus-scrape.path=/debug/metrics/prometheus
-      - traefik.enable=true
-      - traefik.http.middlewares.robinhood-testnet-nitro-archive-pebble-hash-stripprefix.stripprefix.prefixes=/robinhood-testnet-archive
-      - traefik.http.services.robinhood-testnet-nitro-archive-pebble-hash.loadbalancer.server.port=8545
-      - ${NO_SSL:-traefik.http.routers.robinhood-testnet-nitro-archive-pebble-hash.entrypoints=websecure}
-      - ${NO_SSL:-traefik.http.routers.robinhood-testnet-nitro-archive-pebble-hash.tls.certresolver=myresolver}
-      - ${NO_SSL:-traefik.http.routers.robinhood-testnet-nitro-archive-pebble-hash.rule=Host(`$DOMAIN`) && (Path(`/robinhood-testnet-archive`) || Path(`/robinhood-testnet-archive/`))}
-      - ${NO_SSL:+traefik.http.routers.robinhood-testnet-nitro-archive-pebble-hash.rule=Path(`/robinhood-testnet-archive`) || Path(`/robinhood-testnet-archive/`)}
-      - traefik.http.routers.robinhood-testnet-nitro-archive-pebble-hash.middlewares=robinhood-testnet-nitro-archive-pebble-hash-stripprefix, ipallowlist
-
-volumes:
-  robinhood-testnet-nitro-archive-pebble-hash:
-
-x-upstreams:
-  - id: $${ID}
-    labels:
-      provider: $${PROVIDER}
-    connection:
-      generic:
-        rpc:
-          url: $${RPC_URL}
-        ws:
-          frameSize: 20Mb
-          msgSize: 50Mb
-          url: $${WS_URL}
-    chain: robinhood-testnet
-    method-groups:
-      enabled:
-        - debug
-        - filter
-    methods:
-      disabled:
-      enabled:
-        - name: txpool_content # TODO: should be disabled for rollup nodes
-        # standard geth only
-        - name: debug_getRawBlock
-        - name: debug_getRawTransaction
-        - name: debug_getRawReceipts
-        - name: debug_getRawHeader
-        - name: debug_getBadBlocks
-        # non standard geth only slightly dangerous
-        - name: debug_intermediateRoots
-        - name: debug_dumpBlock
-        # standard geth and erigon
-        - name: debug_accountRange
-        - name: debug_getModifiedAccountsByNumber
-        - name: debug_getModifiedAccountsByHash
-        # non standard geth and erigon
-        - name: eth_getRawTransactionByHash
-        - name: eth_getRawTransactionByBlockHashAndIndex
-...
--- a/arc/reth/arc-mainnet-reth-archive-trace.yml
+++ b/arc/reth/arc-mainnet-reth-archive-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  arc-mainnet-archive-consensus-init:
-    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_MAINNET_CONSENSUS_VERSION:-v0.7.3}
+    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_MAINNET_CONSENSUS_VERSION:-0.7.2}
    user: 0:0
    entrypoint: [/usr/local/bin/arc-node-consensus, init]
    command:
@@ -57,7 +57,7 @@ services:
    logging: *logging-defaults

  arc-mainnet-archive:
-    image: ${ARC_RETH_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-execution}:${ARC_MAINNET_RETH_VERSION:-v0.7.3}
+    image: ${ARC_RETH_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-execution}:${ARC_MAINNET_RETH_VERSION:-0.7.2}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -119,7 +119,7 @@ services:
    shm_size: 2gb

  arc-mainnet-archive-node:
-    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_MAINNET_CONSENSUS_VERSION:-v0.7.3}
+    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_MAINNET_CONSENSUS_VERSION:-0.7.2}
    user: 0:0
    expose:
      - 31000
@@ -160,9 +160,6 @@ volumes:
  arc-mainnet-reth-archive-trace-execution:
  arc-mainnet-reth-archive-trace-sockets:

-x-ephemeral-volumes:
-  - arc-mainnet-reth-archive-trace-sockets
-
 x-upstreams:
  - id: $${ID}
    labels:
--- a/arc/reth/arc-mainnet-reth-pruned-trace.yml
+++ b/arc/reth/arc-mainnet-reth-pruned-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  arc-mainnet-consensus-init:
-    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_MAINNET_CONSENSUS_VERSION:-v0.7.3}
+    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_MAINNET_CONSENSUS_VERSION:-0.7.2}
    user: 0:0
    entrypoint: [/usr/local/bin/arc-node-consensus, init]
    command:
@@ -57,7 +57,7 @@ services:
    logging: *logging-defaults

  arc-mainnet:
-    image: ${ARC_RETH_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-execution}:${ARC_MAINNET_RETH_VERSION:-v0.7.3}
+    image: ${ARC_RETH_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-execution}:${ARC_MAINNET_RETH_VERSION:-0.7.2}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -120,7 +120,7 @@ services:
    shm_size: 2gb

  arc-mainnet-node:
-    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_MAINNET_CONSENSUS_VERSION:-v0.7.3}
+    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_MAINNET_CONSENSUS_VERSION:-0.7.2}
    user: 0:0
    expose:
      - 31000
@@ -161,9 +161,6 @@ volumes:
  arc-mainnet-reth-pruned-trace-execution:
  arc-mainnet-reth-pruned-trace-sockets:

-x-ephemeral-volumes:
-  - arc-mainnet-reth-pruned-trace-sockets
-
 x-upstreams:
  - id: $${ID}
    labels:
--- a/arc/reth/arc-testnet-reth-archive-trace.yml
+++ b/arc/reth/arc-testnet-reth-archive-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  arc-testnet-archive-consensus-init:
-    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_TESTNET_CONSENSUS_VERSION:-v0.7.3}
+    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_TESTNET_CONSENSUS_VERSION:-0.7.2}
    user: 0:0
    entrypoint: [/usr/local/bin/arc-node-consensus, init]
    command:
@@ -57,7 +57,7 @@ services:
    logging: *logging-defaults

  arc-testnet-archive:
-    image: ${ARC_RETH_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-execution}:${ARC_TESTNET_RETH_VERSION:-v0.7.3}
+    image: ${ARC_RETH_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-execution}:${ARC_TESTNET_RETH_VERSION:-0.7.2}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -119,7 +119,7 @@ services:
    shm_size: 2gb

  arc-testnet-archive-node:
-    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_TESTNET_CONSENSUS_VERSION:-v0.7.3}
+    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_TESTNET_CONSENSUS_VERSION:-0.7.2}
    user: 0:0
    expose:
      - 31000
@@ -160,9 +160,6 @@ volumes:
  arc-testnet-reth-archive-trace-execution:
  arc-testnet-reth-archive-trace-sockets:

-x-ephemeral-volumes:
-  - arc-testnet-reth-archive-trace-sockets
-
 x-upstreams:
  - id: $${ID}
    labels:
--- a/arc/reth/arc-testnet-reth-pruned-trace.yml
+++ b/arc/reth/arc-testnet-reth-pruned-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  arc-testnet-consensus-init:
-    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_TESTNET_CONSENSUS_VERSION:-v0.7.3}
+    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_TESTNET_CONSENSUS_VERSION:-0.7.2}
    user: 0:0
    entrypoint: [/usr/local/bin/arc-node-consensus, init]
    command:
@@ -57,7 +57,7 @@ services:
    logging: *logging-defaults

  arc-testnet:
-    image: ${ARC_RETH_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-execution}:${ARC_TESTNET_RETH_VERSION:-v0.7.3}
+    image: ${ARC_RETH_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-execution}:${ARC_TESTNET_RETH_VERSION:-0.7.2}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -120,7 +120,7 @@ services:
    shm_size: 2gb

  arc-testnet-node:
-    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_TESTNET_CONSENSUS_VERSION:-v0.7.3}
+    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_TESTNET_CONSENSUS_VERSION:-0.7.2}
    user: 0:0
    expose:
      - 31000
@@ -161,9 +161,6 @@ volumes:
  arc-testnet-reth-pruned-trace-execution:
  arc-testnet-reth-pruned-trace-sockets:

-x-ephemeral-volumes:
-  - arc-testnet-reth-pruned-trace-sockets
-
 x-upstreams:
  - id: $${ID}
    labels:
--- a/arc/reth/arc-testnet-reth-pruned.yml
+++ b/arc/reth/arc-testnet-reth-pruned.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  arc-testnet-consensus-init:
-    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_TESTNET_CONSENSUS_VERSION:-v0.7.3}
+    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_TESTNET_CONSENSUS_VERSION:-0.7.2}
    user: 0:0
    entrypoint: [/usr/local/bin/arc-node-consensus, init]
    command:
@@ -57,7 +57,7 @@ services:
    logging: *logging-defaults

  arc-testnet:
-    image: ${ARC_RETH_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-execution}:${ARC_TESTNET_RETH_VERSION:-v0.7.3}
+    image: ${ARC_RETH_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-execution}:${ARC_TESTNET_RETH_VERSION:-0.7.2}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -120,7 +120,7 @@ services:
    shm_size: 2gb

  arc-testnet-node:
-    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_TESTNET_CONSENSUS_VERSION:-v0.7.3}
+    image: ${ARC_CONSENSUS_IMAGE:-docker.cloudsmith.io/circle/arc-network/arc-consensus}:${ARC_TESTNET_CONSENSUS_VERSION:-0.7.2}
    user: 0:0
    expose:
      - 31000
@@ -161,9 +161,6 @@ volumes:
  arc-testnet-reth-pruned-execution:
  arc-testnet-reth-pruned-sockets:

-x-ephemeral-volumes:
-  - arc-testnet-reth-pruned-sockets
-
 x-upstreams:
  - id: $${ID}
    labels:
--- a/avalanche/go/avalanche-fuji-go-archive-leveldb.yml
+++ b/avalanche/go/avalanche-fuji-go-archive-leveldb.yml
@@ -107,7 +107,7 @@ x-upstreams:
          frameSize: 20Mb
          msgSize: 50Mb
          url: $${WS_URL}
-    chain: avalanche-fuji
+    chain: avalanche
    method-groups:
      enabled:
        - debug
--- a/avalanche/go/avalanche-fuji-go-pruned-leveldb.prune.yml
+++ b/avalanche/go/avalanche-fuji-go-pruned-leveldb.prune.yml
@@ -107,7 +107,7 @@ x-upstreams:
          frameSize: 20Mb
          msgSize: 50Mb
          url: $${WS_URL}
-    chain: avalanche-fuji
+    chain: avalanche
    method-groups:
      enabled:
        - debug
--- a/avalanche/go/avalanche-fuji-go-pruned-leveldb.yml
+++ b/avalanche/go/avalanche-fuji-go-pruned-leveldb.yml
@@ -107,7 +107,7 @@ x-upstreams:
          frameSize: 20Mb
          msgSize: 50Mb
          url: $${WS_URL}
-    chain: avalanche-fuji
+    chain: avalanche
    method-groups:
      enabled:
        - debug
--- a/avalanche/go/avalanche-fuji-go-pruned-pebbledb.prune.yml
+++ b/avalanche/go/avalanche-fuji-go-pruned-pebbledb.prune.yml
@@ -107,7 +107,7 @@ x-upstreams:
          frameSize: 20Mb
          msgSize: 50Mb
          url: $${WS_URL}
-    chain: avalanche-fuji
+    chain: avalanche
    method-groups:
      enabled:
        - debug
--- a/avalanche/go/avalanche-fuji-go-pruned-pebbledb.yml
+++ b/avalanche/go/avalanche-fuji-go-pruned-pebbledb.yml
@@ -107,7 +107,7 @@ x-upstreams:
          frameSize: 20Mb
          msgSize: 50Mb
          url: $${WS_URL}
-    chain: avalanche-fuji
+    chain: avalanche
    method-groups:
      enabled:
        - debug
--- a/aztec/aztec/aztec-mainnet-aztec-pruned.yml
+++ b/aztec/aztec/aztec-mainnet-aztec-pruned.yml
@@ -1,112 +0,0 @@
---
-x-logging-defaults: &logging-defaults
-  driver: json-file
-  options:
-    max-size: "512m"
-    max-file: "2"
-# Aztec full node. See https://docs.aztec.network/network/setup/running_a_node
-# Admin port (8880) is not exposed; use docker exec for admin API.
-
-# Usage:
-#
-# mkdir rpc && cd rpc
-#
-# git init
-# git remote add origin https://github.com/StakeSquid/ethereum-rpc-docker.git
-# git fetch origin vibe
-# git checkout origin/vibe
-#
-# docker run --rm alpine sh -c "printf '0x'; head -c32 /dev/urandom | xxd -p -c 64" > .jwtsecret
-#
-# env
-# ...
-# IP=$(curl ipinfo.io/ip)
-# DOMAIN=${IP}.traefik.me
-# COMPOSE_FILE=base.yml:rpc.yml:aztec/aztec/aztec-mainnet-aztec-pruned.yml
-#
-# docker compose up -d
-#
-# curl -X POST https://${IP}.traefik.me/aztec-mainnet-pruned \
-#   -H "Content-Type: application/json" \
-#   --data '{"jsonrpc":"2.0","method":"eth_blockNumber","params":[],"id":1}'
-
-services:
-  aztec-mainnet-pruned:
-    image: ${AZTEC_AZTEC_IMAGE:-aztecprotocol/aztec}:${AZTEC_MAINNET_AZTEC_VERSION:-5.0.1}
-    sysctls:
-      # TCP Performance
-      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
-      net.ipv4.tcp_no_metrics_save: 1             # Disable metrics cache
-      net.ipv4.tcp_rmem: 4096 87380 16777216      # Increase TCP read buffers
-      net.ipv4.tcp_wmem: 4096 87380 16777216      # Increase TCP write buffers
-      net.core.somaxconn: 32768                   # Higher connection queue
-      # Memory/Connection Management
-      # net.core.netdev_max_backlog: 50000          # Increase network buffer
-      net.ipv4.tcp_max_syn_backlog: 30000         # More SYN requests
-      net.ipv4.tcp_max_tw_buckets: 2000000        # Allow more TIME_WAIT sockets
-    ulimits:
-      nofile: 1048576    # Max open files (for RPC/WS connections)
-    user: root
-    ports:
-      - 13840:13840
-      - 13840:13840/udp
-    expose:
-      - 8545
-    environment:
-      AZTEC_ADMIN_PORT: '8880'
-      AZTEC_PORT: '8545'
-      DATA_DIRECTORY: /var/lib/data
-      ETHEREUM_DEBUG_HOSTS: ${ETHEREUM_MAINNET_DEBUG_HOSTS:-${ETHEREUM_MAINNET_EXECUTION_RPC}}
-      ETHEREUM_HOSTS: ${ETHEREUM_MAINNET_EXECUTION_RPC}
-      L1_CONSENSUS_HOST_URLS: ${ETHEREUM_MAINNET_BEACON_REST}
-      LOG_LEVEL: ${AZTEC_LOG_LEVEL:-info}
-      P2P_IP: ${IP}
-      P2P_PORT: '13840'
-    entrypoint: [node, --no-warnings, /usr/src/yarn-project/aztec/dest/bin/index.js, start]
-    command:
-      - --node
-      - --network=mainnet
-    restart: unless-stopped
-    stop_grace_period: 5m
-    networks:
-      - chains
-    volumes:
-      - ${AZTEC_MAINNET_AZTEC_PRUNED_DATA:-aztec-mainnet-aztec-pruned}:/var/lib/data
-      - /slowdisk:/slowdisk
-    logging: *logging-defaults
-    labels:
-      - prometheus-scrape.enabled=false
-      - traefik.enable=true
-      - traefik.http.middlewares.aztec-mainnet-aztec-pruned-stripprefix.stripprefix.prefixes=/aztec-mainnet-pruned
-      - traefik.http.services.aztec-mainnet-aztec-pruned.loadbalancer.server.port=8545
-      - ${NO_SSL:-traefik.http.routers.aztec-mainnet-aztec-pruned.entrypoints=websecure}
-      - ${NO_SSL:-traefik.http.routers.aztec-mainnet-aztec-pruned.tls.certresolver=myresolver}
-      - ${NO_SSL:-traefik.http.routers.aztec-mainnet-aztec-pruned.rule=Host(`$DOMAIN`) && (Path(`/aztec-mainnet-pruned`) || Path(`/aztec-mainnet-pruned/`))}
-      - ${NO_SSL:+traefik.http.routers.aztec-mainnet-aztec-pruned.rule=Path(`/aztec-mainnet-pruned`) || Path(`/aztec-mainnet-pruned/`)}
-      - traefik.http.routers.aztec-mainnet-aztec-pruned.middlewares=aztec-mainnet-aztec-pruned-stripprefix, ipallowlist
-
-volumes:
-  aztec-mainnet-aztec-pruned:
-
-x-upstreams:
-  - id: $${ID}
-    labels:
-      provider: $${PROVIDER}
-    connection:
-      generic:
-        rpc:
-          url: $${RPC_URL}
-        ws:
-          frameSize: 20Mb
-          msgSize: 50Mb
-          url: $${WS_URL}
-    chain: aztec-mainnet
-    method-groups:
-      enabled:
-        - debug
-        - filter
-    methods:
-      disabled:
-      enabled:
-        - name: txpool_content # TODO: should be disabled for rollup nodes
-...
--- a/aztec/aztec/aztec-testnet-aztec-pruned.yml
+++ b/aztec/aztec/aztec-testnet-aztec-pruned.yml
@@ -32,7 +32,7 @@ x-logging-defaults: &logging-defaults

 services:
  aztec-testnet-pruned:
-    image: ${AZTEC_AZTEC_IMAGE:-aztecprotocol/aztec}:${AZTEC_TESTNET_AZTEC_VERSION:-5.0.1}
+    image: ${AZTEC_AZTEC_IMAGE:-aztecprotocol/aztec}:${AZTEC_TESTNET_AZTEC_VERSION:-5.0.0-rc.1}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -56,7 +56,6 @@ services:
      AZTEC_ADMIN_PORT: '8880'
      AZTEC_PORT: '8545'
      DATA_DIRECTORY: /var/lib/data
-      ETHEREUM_DEBUG_HOSTS: ${ETHEREUM_SEPOLIA_DEBUG_HOSTS:-${ETHEREUM_SEPOLIA_EXECUTION_RPC}}
      ETHEREUM_HOSTS: ${ETHEREUM_SEPOLIA_EXECUTION_RPC}
      L1_CONSENSUS_HOST_URLS: ${ETHEREUM_SEPOLIA_BEACON_REST}
      LOG_LEVEL: ${AZTEC_LOG_LEVEL:-info}
--- a/backup-node.sh
+++ b/backup-node.sh
@@ -157,15 +157,8 @@ for key in $keys; do
    folder_size_gb=$(printf "%.0f" "$folder_size")

    if (( folder_size_gb < 1 )) && [[ "$FORCE_SMALL" != true ]]; then
-	# The torn-backup floor applies to the MAIN data volume only (key == compose
-	# basename). Sidecar volumes (eigenda-proxy, configs, ...) are legitimately
-	# tiny — a 0G sidecar aborting the whole backup left no manifest and blocked
-	# the refresh lane on every ronin bench-retire (4 cycles, 2026-07).
-	if [[ "$key" == "$(basename "$compose_name")" ]]; then
-	    echo "FATAL: existing datadir too small for backup (${folder_size_gb}G at $source_folder); use --force if intentional" >&2
-	    exit 1
-	fi
-	echo "NOTE: sidecar volume rpc_$key is ${folder_size_gb}G — allowing small backup (floor guards the main data volume only)"
+	echo "FATAL: existing datadir too small for backup (${folder_size_gb}G at $source_folder); use --force if intentional" >&2
+	exit 1
    fi
    
    timestamp=$(date +'%Y-%m-%d-%H-%M-%S')
--- a/berachain/geth/berachain-mainnet-geth-pruned-pebble-path.yml
+++ b/berachain/geth/berachain-mainnet-geth-pruned-pebble-path.yml
@@ -112,7 +112,7 @@ services:
      context: ./berachain
      dockerfile: beacon-kit.Dockerfile
      args:
-        BEACONKIT_VERSION: ${BERACHAIN_MAINNET_BEACON_KIT_VERSION:-v1.4.1}
+        BEACONKIT_VERSION: ${BERACHAIN_MAINNET_BEACON_KIT_VERSION:-v1.4.0-rc3}
        BEACONKIT_IMAGE: ${BERACHAIN_MAINNET_BEACON_KIT_IMAGE:-ghcr.io/berachain/beacon-kit}
    ports:
      - 16562:16562
--- a/berachain/reth/berachain-bartio-reth-archive-trace.yml
+++ b/berachain/reth/berachain-bartio-reth-archive-trace.yml
@@ -61,7 +61,7 @@ x-logging-defaults: &logging-defaults

 services:
  berachain-bartio-reth:
-    image: ${BERACHAIN_RETH_IMAGE:-ghcr.io/berachain/bera-reth}:${BERACHAIN_BARTIO_RETH_VERSION:-v1.4.4}
+    image: ${BERACHAIN_RETH_IMAGE:-ghcr.io/berachain/bera-reth}:${BERACHAIN_BARTIO_RETH_VERSION:-v1.4.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/berachain/reth/berachain-bartio-reth-pruned-trace.yml
+++ b/berachain/reth/berachain-bartio-reth-pruned-trace.yml
@@ -61,7 +61,7 @@ x-logging-defaults: &logging-defaults

 services:
  berachain-bartio-reth-pruned:
-    image: ${BERACHAIN_RETH_IMAGE:-ghcr.io/berachain/bera-reth}:${BERACHAIN_BARTIO_RETH_VERSION:-v1.4.4}
+    image: ${BERACHAIN_RETH_IMAGE:-ghcr.io/berachain/bera-reth}:${BERACHAIN_BARTIO_RETH_VERSION:-v1.4.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/berachain/reth/berachain-bepolia-reth-archive-trace.yml
+++ b/berachain/reth/berachain-bepolia-reth-archive-trace.yml
@@ -61,7 +61,7 @@ x-logging-defaults: &logging-defaults

 services:
  berachain-bepolia-reth:
-    image: ${BERACHAIN_RETH_IMAGE:-ghcr.io/berachain/bera-reth}:${BERACHAIN_BEPOLIA_RETH_VERSION:-v1.4.4}
+    image: ${BERACHAIN_RETH_IMAGE:-ghcr.io/berachain/bera-reth}:${BERACHAIN_BEPOLIA_RETH_VERSION:-v1.4.2}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/berachain/reth/berachain-bepolia-reth-pruned-trace.yml
+++ b/berachain/reth/berachain-bepolia-reth-pruned-trace.yml
@@ -61,7 +61,7 @@ x-logging-defaults: &logging-defaults

 services:
  berachain-bepolia-reth-pruned:
-    image: ${BERACHAIN_RETH_IMAGE:-ghcr.io/berachain/bera-reth}:${BERACHAIN_BEPOLIA_RETH_VERSION:-v1.4.4}
+    image: ${BERACHAIN_RETH_IMAGE:-ghcr.io/berachain/bera-reth}:${BERACHAIN_BEPOLIA_RETH_VERSION:-v1.4.2}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/berachain/reth/berachain-mainnet-reth-archive-trace.yml
+++ b/berachain/reth/berachain-mainnet-reth-archive-trace.yml
@@ -61,7 +61,7 @@ x-logging-defaults: &logging-defaults

 services:
  berachain-mainnet-reth:
-    image: ${BERACHAIN_RETH_IMAGE:-ghcr.io/berachain/bera-reth}:${BERACHAIN_MAINNET_RETH_VERSION:-v1.4.4}
+    image: ${BERACHAIN_RETH_IMAGE:-ghcr.io/berachain/bera-reth}:${BERACHAIN_MAINNET_RETH_VERSION:-v1.4.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -89,10 +89,10 @@ services:
      - CHAINID=80094
      - CHAINNAME=mainnet
      - CHAIN_SPEC=mainnet
-    entrypoint: [bera-reth, node]
+    entrypoint: [/bin/bash, -c, "trap 'exit 0' SIGTERM; while [ ! -f /config/eth-genesis.json ] && [ ! -f /tmp/stop ]; do sleep 1 & wait $!; done; exec bera-reth node \"$@\"", --]
    command:
      - --bootnodes=enode://0c5a4a3c0e81fce2974e4d317d88df783731183d534325e32e0fdf8f4b119d7889fa254d3a38890606ec300d744e2aa9c87099a4a032f5c94efe53f3fcdfecfe@34.64.176.79:30303,enode://b6a3137d3a36ef37c4d31843775a9dc293f41bcbde33b6309c80b1771b6634827cd188285136a57474427bd8845adc2f6fe2e0b106bd58d14795b08910b9c326@34.64.181.70:30303,enode://0b6633300614bc2b9749aee0cace7a091ec5348762aee7b1d195f7616d03a9409019d9bef336624bab72e0d069cd4cf0b0de6fbbf53f04f6b6e4c5b39c6bdca6@34.64.39.31:30303,enode://552b001abebb5805fcd734ad367cd05d9078d18f23ec598d7165460fadcfc51116ad95c418f7ea9a141aa8cbc496c8bea3322b67a5de0d3380f11aab1a797513@34.64.183.158:30303,enode://5b037f66099d5ded86eb7e1619f6d06ceb15609e8cc345ced22a4772b06178004e1490a3cd32fd1222789de4c6e4021c2d648a3d750f6d5323e64b771bbd8de7@34.87.142.180:30303,enode://846db253c53753d3ea1197aec296306dc84c25f3afdf142b65cb0fe0f984de55072daa3bbf05a9aea046a38a2292403137b6eafefd5646fcf62120b74e3b898d@34.142.170.110:30303,enode://64b7f6ee9bcd942ad4949c70f2077627f078a057dfd930e6e904e12643d8952f5ae87c91e24559765393f244a72c9d5c011d7d5176e59191d38f315db85a20f5@34.126.161.16:30303,enode://cf4d19bfb8ec507427ec882bac0bac85a0c8c9ddaa0ec91b773bb614e5e09d107cd9fbe323b96f62f31c493f8f42cc5495c18b87c08560c5dea1dfd25256dcf6@35.247.162.2:30303,enode://bb7e44178543431feac8f0ee3827056b7b84d8235b802a8bdbbcd4939dab7f7dd2579ff577a38b002bb0139792af67abd2dd5c9f4f85b8da6e914fa76dca82bc@35.198.150.35:30303,enode://8fef1f5df45e7b31be00a21e1da5665d5a5f5bf4c379086b843f03eade941bdd157f08c95b31880c492577edb9a9b185df7191eaebf54ab06d5bd683b289f3af@34.107.7.241:30303,enode://ce9c87cfe089f6811d26c96913fa3ec10b938d9017fc6246684c74a33679ee34ceca9447180fb509e37bf2b706c2877a82085d34bfd83b5b520ee1288b0fc32f@35.198.109.49:30303,enode://713657eb6a53feadcbc47e634ad557326a51eb6818a3e19a00a8111492f50a666ccbf2f5d334d247ecf941e68d242ef5c3b812b63c44d381ef11f79c2cdb45c7@34.141.15.100:30303,enode://d071fa740e063ce1bb9cdc2b7937baeff6dc4000f91588d730a731c38a6ff0d4015814812c160fab8695e46f74b9b618735368ea2f16db4d785f16d29b3fb7b0@35.203.2.210:30303,enode://ffc452fe451a2e5f89fe634744aea334d92dcd30d881b76209d2db7dbf4b7ee047e7c69a5bb1633764d987a7441d9c4bc57ccdbfd6442a2f860bf953bc89a9b9@34.152.50.224:30303,enode://da94328302a1d1422209d1916744e90b6095a48b2340dcec39b22002c098bb4d58a880dab98eb26edf03fa4705d1b62f99a8c5c14e6666e4726b6d3066d8a4d7@34.95.61.106:30303,enode://19c7671a4844699b481e81a5bcfe7bafc7fefa953c16ebbe1951b1046371e73839e9058de6b7d3c934318fe7e7233dde3621c1c1018eb8b294ea3d4516147150@35.203.82.137:30303
-      - --chain=mainnet
+      - --chain=/config/eth-genesis.json
      - --datadir=/root/.local/share/reth
      - --discovery.port=12881
      - --engine.always-process-payload-attributes-on-canonical-head
@@ -131,6 +131,7 @@ services:
      - ${BERACHAIN_MAINNET_RETH_ARCHIVE_TRACE_DATA:-berachain-mainnet-reth-archive-trace}:/root/.local/share/reth
      - .jwtsecret:/jwtsecret:ro
      - /slowdisk:/slowdisk
+      - berachain-mainnet-reth-archive-trace_config:/config
    logging: *logging-defaults
    labels:
      - prometheus-scrape.enabled=true
@@ -151,7 +152,7 @@ services:
      context: ./berachain
      dockerfile: beacon-kit.Dockerfile
      args:
-        BEACONKIT_VERSION: ${BERACHAIN_MAINNET_BEACON_KIT_VERSION:-v1.4.1}
+        BEACONKIT_VERSION: ${BERACHAIN_MAINNET_BEACON_KIT_VERSION:-v1.4.0-rc3}
        BEACONKIT_IMAGE: ${BERACHAIN_MAINNET_BEACON_KIT_IMAGE:-ghcr.io/berachain/beacon-kit}
    ports:
      - 17881:17881
--- a/berachain/reth/berachain-mainnet-reth-pruned-trace.yml
+++ b/berachain/reth/berachain-mainnet-reth-pruned-trace.yml
@@ -61,7 +61,7 @@ x-logging-defaults: &logging-defaults

 services:
  berachain-mainnet-reth-pruned:
-    image: ${BERACHAIN_RETH_IMAGE:-ghcr.io/berachain/bera-reth}:${BERACHAIN_MAINNET_RETH_VERSION:-v1.4.4}
+    image: ${BERACHAIN_RETH_IMAGE:-ghcr.io/berachain/bera-reth}:${BERACHAIN_MAINNET_RETH_VERSION:-v1.4.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -153,7 +153,7 @@ services:
      context: ./berachain
      dockerfile: beacon-kit.Dockerfile
      args:
-        BEACONKIT_VERSION: ${BERACHAIN_MAINNET_BEACON_KIT_VERSION:-v1.4.1}
+        BEACONKIT_VERSION: ${BERACHAIN_MAINNET_BEACON_KIT_VERSION:-v1.4.0-rc3}
        BEACONKIT_IMAGE: ${BERACHAIN_MAINNET_BEACON_KIT_IMAGE:-ghcr.io/berachain/beacon-kit}
    ports:
      - 15900:15900
--- a/bitcoin-cash/bitcoind/bitcoin-cash-mainnet-bitcoind-full.yml
+++ b/bitcoin-cash/bitcoind/bitcoin-cash-mainnet-bitcoind-full.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  bitcoin-cash-mainnet:
-    image: ${BITCOIN_CASH_BITCOIND_IMAGE:-bitcoinabc/bitcoin-abc}:${BITCOIN_CASH_MAINNET_BITCOIND_VERSION:-0.33.8}
+    image: ${BITCOIN_CASH_BITCOIND_IMAGE:-bitcoinabc/bitcoin-abc}:${BITCOIN_CASH_MAINNET_BITCOIND_VERSION:-0.33.7}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/bitcoin-cash/bitcoind/bitcoin-cash-testnet-bitcoind-full.yml
+++ b/bitcoin-cash/bitcoind/bitcoin-cash-testnet-bitcoind-full.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  bitcoin-cash-testnet:
-    image: ${BITCOIN_CASH_BITCOIND_IMAGE:-bitcoinabc/bitcoin-abc}:${BITCOIN_CASH_TESTNET_BITCOIND_VERSION:-0.33.8}
+    image: ${BITCOIN_CASH_BITCOIND_IMAGE:-bitcoinabc/bitcoin-abc}:${BITCOIN_CASH_TESTNET_BITCOIND_VERSION:-0.33.7}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/bootstrap-peers.sh
+++ b/bootstrap-peers.sh
@@ -1,102 +0,0 @@
-#!/bin/bash
-# bootstrap-peers.sh — fetch curated third-party bootstrap enodes for a network.
-#
-# Secondary seed source for peer-reinject / restore flows. Primary source remains
-# the node's own peer-capture state. Same public JSON customers curl:
-#   https://stakesquid.eu/bootstrap/<network>.json
-#
-# Usage:
-#   bootstrap-peers.sh <network>              # print enodes (one per line)
-#   bootstrap-peers.sh <network> --json       # print full JSON
-#   bootstrap-peers.sh --from-compose <path>  # derive network from compose path
-#   bootstrap-peers.sh ... --dry-run          # show URL + count, no failure on empty
-#
-# Env:
-#   BOOTSTRAP_BASE_URL  default https://stakesquid.eu/bootstrap
-#   BOOTSTRAP_MAX       max enodes to emit (default 25)
-set -euo pipefail
-
-BASE_URL="${BOOTSTRAP_BASE_URL:-https://stakesquid.eu/bootstrap}"
-MAX="${BOOTSTRAP_MAX:-25}"
-DRY_RUN=false
-JSON_OUT=false
-NETWORK=""
-COMPOSE=""
-
-usage() {
-    echo "Usage: $0 <network> [--json] [--dry-run]" >&2
-    echo "       $0 --from-compose <compose-path> [--json] [--dry-run]" >&2
-    exit 1
-}
-
-while [[ $# -gt 0 ]]; do
-    case "$1" in
-        --from-compose)
-            COMPOSE="${2:-}"; shift 2 || usage
-            ;;
-        --json) JSON_OUT=true; shift ;;
-        --dry-run) DRY_RUN=true; shift ;;
-        -h|--help) usage ;;
-        -*)
-            echo "Unknown option: $1" >&2
-            usage
-            ;;
-        *)
-            NETWORK="$1"; shift
-            ;;
-    esac
-done
-
-network_from_compose() {
-    local path="$1"
-    local base
-    base="$(basename "$path" | sed 's/--.*//')"
-    # strip client/variant suffixes (same idea as fleet-peers network_from_path)
-    for sep in -op-reth -op-geth -op-erigon -op-nethermind \
-               -reth -geth -erigon -erigon3 -besu -nethermind \
-               -bsc -nitro -l2geth -bor -external-node -gaiad \
-               -juno -rskj -avalanche -maru; do
-        case "$base" in
-            *"$sep"*) base="${base%%$sep*}"; break ;;
-        esac
-    done
-    # common leftover: -pruned / -archive / -pebble / -path / -trace / -bonsai
-    base="$(echo "$base" | sed -E 's/-(pruned|archive|full|pebble|path|trace|bonsai|snap|hash).*//')"
-    echo "$base"
-}
-
-if [[ -n "$COMPOSE" ]]; then
-    NETWORK="$(network_from_compose "$COMPOSE")"
-fi
-if [[ -z "$NETWORK" ]]; then
-    usage
-fi
-
-URL="${BASE_URL%/}/${NETWORK}.json"
-TMP="$(mktemp)"
-trap 'rm -f "$TMP"' EXIT
-
-if ! curl -fsS --max-time 15 "$URL" -o "$TMP" 2>/dev/null; then
-    if [[ "$DRY_RUN" == true ]]; then
-        echo "bootstrap-peers: dry-run fetch failed for $URL" >&2
-        exit 0
-    fi
-    echo "bootstrap-peers: fetch failed: $URL" >&2
-    exit 1
-fi
-
-COUNT="$(jq -r '.peers | length // 0' "$TMP" 2>/dev/null || echo 0)"
-UPDATED="$(jq -r '.updated // empty' "$TMP" 2>/dev/null || true)"
-
-if [[ "$DRY_RUN" == true ]]; then
-    echo "bootstrap-peers: network=$NETWORK url=$URL peers=$COUNT updated=$UPDATED"
-    jq -r '.peers[:3][]? | "  \(.stability.tier // "?") score=\(.stability.score // "?") n_vantage=\(.stability.n_vantage_nodes // "?") \(.enode[0:60])…"' "$TMP" 2>/dev/null || true
-    exit 0
-fi
-
-if [[ "$JSON_OUT" == true ]]; then
-    cat "$TMP"
-    exit 0
-fi
-
-jq -r --argjson m "$MAX" '.peers[:$m][]?.enode // empty' "$TMP" 2>/dev/null | grep -E '^enode://' || true
--- a/bsc/bsc/bsc-chapel-bsc-pruned-pebble-path.yml
+++ b/bsc/bsc/bsc-chapel-bsc-pruned-pebble-path.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  bsc-chapel:
-    image: ${BSC_BSC_IMAGE:-ghcr.io/bnb-chain/bsc}:${BSC_CHAPEL_BSC_VERSION:-1.7.6}
+    image: ${BSC_BSC_IMAGE:-ghcr.io/bnb-chain/bsc}:${BSC_CHAPEL_BSC_VERSION:-1.7.3}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/bsc/bsc/bsc-mainnet-bsc-minimal-pebble-hash.yml
+++ b/bsc/bsc/bsc-mainnet-bsc-minimal-pebble-hash.yml
@@ -32,7 +32,7 @@ x-logging-defaults: &logging-defaults

 services:
  bsc-mainnet-minimal:
-    image: ${BSC_BSC_IMAGE:-ghcr.io/bnb-chain/bsc}:${BSC_MAINNET_BSC_VERSION:-1.7.6}
+    image: ${BSC_BSC_IMAGE:-ghcr.io/bnb-chain/bsc}:${BSC_MAINNET_BSC_VERSION:-1.7.3}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/bsc/bsc/bsc-mainnet-bsc-minimal-pebble-path.yml
+++ b/bsc/bsc/bsc-mainnet-bsc-minimal-pebble-path.yml
@@ -32,7 +32,7 @@ x-logging-defaults: &logging-defaults

 services:
  bsc-mainnet-minimal:
-    image: ${BSC_BSC_IMAGE:-ghcr.io/bnb-chain/bsc}:${BSC_MAINNET_BSC_VERSION:-1.7.6}
+    image: ${BSC_BSC_IMAGE:-ghcr.io/bnb-chain/bsc}:${BSC_MAINNET_BSC_VERSION:-1.7.3}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/bsc/bsc/bsc-mainnet-bsc-pruned-pebble-path.yml
+++ b/bsc/bsc/bsc-mainnet-bsc-pruned-pebble-path.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  bsc-mainnet:
-    image: ${BSC_BSC_IMAGE:-ghcr.io/bnb-chain/bsc}:${BSC_MAINNET_BSC_VERSION:-1.7.6}
+    image: ${BSC_BSC_IMAGE:-ghcr.io/bnb-chain/bsc}:${BSC_MAINNET_BSC_VERSION:-1.7.3}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/bsc/reth/bsc-chapel-reth-archive-trace-triedb.yml
+++ b/bsc/reth/bsc-chapel-reth-archive-trace-triedb.yml
@@ -49,7 +49,7 @@ services:
      args:
        LLVM_IMAGE: ${LLVM_IMAGE:-snowstep/llvm}
        LLVM_VERSION: ${LLVM_VERSION:-20250912105042}
-        RETH_VERSION: ${BSC_CHAPEL_RETH_VERSION:-v0.1.1}
+        RETH_VERSION: ${BSC_CHAPEL_RETH_VERSION:-v0.0.6.3}
        RETH_REPO: ${BSC_CHAPEL_RETH_REPO:-https://github.com/bnb-chain/reth-bsc.git}
        ARCH_TARGET: ${ARCH_TARGET:-native}
        PROFILE: ${RETH_BUILD_PROFILE:-maxperf}
@@ -102,6 +102,7 @@ services:
      - --rpc.max-connections=50000
      - --rpc.max-logs-per-response=0
      - --rpc.max-trace-filter-blocks=10000
+      - --statedb.triedb
      - --ws
      - --ws.addr=0.0.0.0
      - --ws.api=admin,debug,eth,net,trace,txpool,web3,rpc,reth,ots,flashbots,mev
--- a/bsc/reth/bsc-chapel-reth-archive-trace.yml
+++ b/bsc/reth/bsc-chapel-reth-archive-trace.yml
@@ -49,7 +49,7 @@ services:
      args:
        LLVM_IMAGE: ${LLVM_IMAGE:-snowstep/llvm}
        LLVM_VERSION: ${LLVM_VERSION:-20250912105042}
-        RETH_VERSION: ${BSC_CHAPEL_RETH_VERSION:-v0.1.1}
+        RETH_VERSION: ${BSC_CHAPEL_RETH_VERSION:-v0.0.6.3}
        RETH_REPO: ${BSC_CHAPEL_RETH_REPO:-https://github.com/bnb-chain/reth-bsc.git}
        ARCH_TARGET: ${ARCH_TARGET:-native}
        PROFILE: ${RETH_BUILD_PROFILE:-maxperf}
--- a/bsc/reth/bsc-chapel-reth-pruned-trace-triedb.yml
+++ b/bsc/reth/bsc-chapel-reth-pruned-trace-triedb.yml
@@ -49,7 +49,7 @@ services:
      args:
        LLVM_IMAGE: ${LLVM_IMAGE:-snowstep/llvm}
        LLVM_VERSION: ${LLVM_VERSION:-20250912105042}
-        RETH_VERSION: ${BSC_CHAPEL_RETH_VERSION:-v0.1.1}
+        RETH_VERSION: ${BSC_CHAPEL_RETH_VERSION:-v0.0.6.3}
        RETH_REPO: ${BSC_CHAPEL_RETH_REPO:-https://github.com/bnb-chain/reth-bsc.git}
        ARCH_TARGET: ${ARCH_TARGET:-native}
        PROFILE: ${RETH_BUILD_PROFILE:-maxperf}
@@ -103,6 +103,7 @@ services:
      - --rpc.max-connections=50000
      - --rpc.max-logs-per-response=0
      - --rpc.max-trace-filter-blocks=10000
+      - --statedb.triedb
      - --ws
      - --ws.addr=0.0.0.0
      - --ws.api=admin,debug,eth,net,trace,txpool,web3,rpc,reth,ots,flashbots,mev
--- a/bsc/reth/bsc-chapel-reth-pruned-trace.yml
+++ b/bsc/reth/bsc-chapel-reth-pruned-trace.yml
@@ -49,7 +49,7 @@ services:
      args:
        LLVM_IMAGE: ${LLVM_IMAGE:-snowstep/llvm}
        LLVM_VERSION: ${LLVM_VERSION:-20250912105042}
-        RETH_VERSION: ${BSC_CHAPEL_RETH_VERSION:-v0.1.1}
+        RETH_VERSION: ${BSC_CHAPEL_RETH_VERSION:-v0.0.6.3}
        RETH_REPO: ${BSC_CHAPEL_RETH_REPO:-https://github.com/bnb-chain/reth-bsc.git}
        ARCH_TARGET: ${ARCH_TARGET:-native}
        PROFILE: ${RETH_BUILD_PROFILE:-maxperf}
--- a/bsc/reth/bsc-mainnet-reth-archive-trace-triedb.yml
+++ b/bsc/reth/bsc-mainnet-reth-archive-trace-triedb.yml
@@ -49,7 +49,7 @@ services:
      args:
        LLVM_IMAGE: ${LLVM_IMAGE:-snowstep/llvm}
        LLVM_VERSION: ${LLVM_VERSION:-20250912105042}
-        RETH_VERSION: ${BSC_MAINNET_RETH_VERSION:-v0.1.1}
+        RETH_VERSION: ${BSC_MAINNET_RETH_VERSION:-v0.0.6.3}
        RETH_REPO: ${BSC_MAINNET_RETH_REPO:-https://github.com/bnb-chain/reth-bsc.git}
        ARCH_TARGET: ${ARCH_TARGET:-native}
        PROFILE: ${RETH_BUILD_PROFILE:-maxperf}
@@ -103,6 +103,7 @@ services:
      - --rpc.max-connections=50000
      - --rpc.max-logs-per-response=0
      - --rpc.max-trace-filter-blocks=10000
+      - --statedb.triedb
      - --ws
      - --ws.addr=0.0.0.0
      - --ws.api=admin,debug,eth,net,trace,txpool,web3,rpc,reth,ots,flashbots,mev
--- a/bsc/reth/bsc-mainnet-reth-archive-trace.yml
+++ b/bsc/reth/bsc-mainnet-reth-archive-trace.yml
@@ -49,7 +49,7 @@ services:
      args:
        LLVM_IMAGE: ${LLVM_IMAGE:-snowstep/llvm}
        LLVM_VERSION: ${LLVM_VERSION:-20250912105042}
-        RETH_VERSION: ${BSC_MAINNET_RETH_VERSION:-v0.1.1}
+        RETH_VERSION: ${BSC_MAINNET_RETH_VERSION:-v0.0.6.3}
        RETH_REPO: ${BSC_MAINNET_RETH_REPO:-https://github.com/bnb-chain/reth-bsc.git}
        ARCH_TARGET: ${ARCH_TARGET:-native}
        PROFILE: ${RETH_BUILD_PROFILE:-maxperf}
--- a/bsc/reth/bsc-mainnet-reth-pruned-trace-triedb.yml
+++ b/bsc/reth/bsc-mainnet-reth-pruned-trace-triedb.yml
@@ -49,7 +49,7 @@ services:
      args:
        LLVM_IMAGE: ${LLVM_IMAGE:-snowstep/llvm}
        LLVM_VERSION: ${LLVM_VERSION:-20250912105042}
-        RETH_VERSION: ${BSC_MAINNET_RETH_VERSION:-v0.1.1}
+        RETH_VERSION: ${BSC_MAINNET_RETH_VERSION:-v0.0.6.3}
        RETH_REPO: ${BSC_MAINNET_RETH_REPO:-https://github.com/bnb-chain/reth-bsc.git}
        ARCH_TARGET: ${ARCH_TARGET:-native}
        PROFILE: ${RETH_BUILD_PROFILE:-maxperf}
@@ -103,6 +103,7 @@ services:
      - --rpc.max-connections=50000
      - --rpc.max-logs-per-response=0
      - --rpc.max-trace-filter-blocks=10000
+      - --statedb.triedb
      - --ws
      - --ws.addr=0.0.0.0
      - --ws.api=admin,debug,eth,net,trace,txpool,web3,rpc,reth,ots,flashbots,mev
--- a/bsc/reth/bsc-mainnet-reth-pruned-trace.yml
+++ b/bsc/reth/bsc-mainnet-reth-pruned-trace.yml
@@ -49,7 +49,7 @@ services:
      args:
        LLVM_IMAGE: ${LLVM_IMAGE:-snowstep/llvm}
        LLVM_VERSION: ${LLVM_VERSION:-20250912105042}
-        RETH_VERSION: ${BSC_MAINNET_RETH_VERSION:-v0.1.1}
+        RETH_VERSION: ${BSC_MAINNET_RETH_VERSION:-v0.0.6.3}
        RETH_REPO: ${BSC_MAINNET_RETH_REPO:-https://github.com/bnb-chain/reth-bsc.git}
        ARCH_TARGET: ${ARCH_TARGET:-native}
        PROFILE: ${RETH_BUILD_PROFILE:-maxperf}
--- a/clone-backup.sh
+++ b/clone-backup.sh
@@ -224,7 +224,6 @@ setup_slowdisk_structure() {
        return 1
    fi
    
-    SLOWDISK_TRANSFORMS=""
    echo "Setting up SLOWDISK structure for $key"
    echo "  Static size: $((static_size_kb / 1024))MB"
    echo "  Static paths: ${#static_paths[@]}"
@@ -254,11 +253,6 @@ setup_slowdisk_structure() {
        local slowdisk_path="${slowdisk_base}/rpc_${key}__data_${path//\//__}"
        local target_path="${volume_path}/${path}"
        local target_dir=$(dirname "$target_path")
-        # tar cannot extract THROUGH a symlink to another device (EXDEV
-        # "Invalid cross-device link", reproduced GNU tar 1.34+1.35 2026-07-11 -
-        # killed the katana->uk-4 provision). Collect --transform rewrites so tar
-        # writes directly into /slowdisk; the symlink remains for runtime.
-        SLOWDISK_TRANSFORMS+=" --transform='s|^\\(\\./\\)\\?var/lib/docker/volumes/rpc_${key}/_data/${path}|slowdisk/rpc_${key}__data_${path//\//__}|'"
        
        # Create parent directories in volume
        $SSH_CMD "$DEST_HOST" "mkdir -p '$target_dir'"
@@ -298,7 +292,6 @@ cleanup_all_ports() {
 # Transfer backup file using screen method with better error handling
 transfer_backup() {
    local key=$1
-    local compose_file=$2
    local volume_name="rpc_$key"
    
    # Find the newest restorable backup file (skip near-empty artifacts)
@@ -306,17 +299,6 @@ transfer_backup() {
    backup_file=$(select_newest_local_backup "$backup_dir" "$volume_name")
    
    if [[ -z "$backup_file" ]] || [[ ! -f "$backup_file" ]]; then
-        if [[ "$volume_name" == *-secrets || "$volume_name" == *-jwt ]]; then
-            echo "Note: no backup for secrets/jwt volume $volume_name (regenerated at create-node), skipping"
-            return 2
-        fi
-        # Check if this volume is optional or ephemeral - if so, skip gracefully
-        if [[ -n "$compose_file" && -f "$compose_file" ]]; then
-            if is_ephemeral_volume_key "$key" "$compose_file" || is_optional_volume_key "$key" "$compose_file"; then
-                echo "Note: no backup for optional/ephemeral volume $volume_name (will be created empty at destination), skipping"
-                return 2
-            fi
-        fi
        echo "Warning: No restorable backup file found for $volume_name, skipping"
        return 1
    fi
@@ -345,7 +327,7 @@ transfer_backup() {
                    # Use --skip-old-files to avoid overwriting existing symlinks/directories
                    # and --keep-directory-symlink so tar extracts THROUGH the pre-created dir symlinks
                    # instead of trying to mkdir over them (which fails with 'Cannot mkdir: File exists')
-                    tar_extract_opts="-xf - -C / --skip-old-files --keep-directory-symlink${SLOWDISK_TRANSFORMS}"
+                    tar_extract_opts="-xf - -C / --skip-old-files --keep-directory-symlink"
                    echo "SLOWDISK structure ready, will extract respecting symlinks"
                else
                    echo "Warning: Failed to setup SLOWDISK structure, falling back to normal extraction"
@@ -362,17 +344,6 @@ transfer_backup() {
        echo "No metadata file found, using normal extraction"
    fi
    
-
-    # AFTER SLOWDISK_TRANSFORMS: rewrite remaining var/lib/docker/ members onto
-    # the target's real docker root when it is a cross-device symlink (see
-    # docker_root_transform in volume-utils.sh).
-    local _drt
-    _drt=$(docker_root_transform)
-    if [[ -n "$_drt" ]]; then
-        echo "Target /var/lib/docker is a symlink; appending docker-root --transform (after slowdisk)"
-        tar_extract_opts="${tar_extract_opts}${_drt}"
-    fi
-
    local file_size=$(stat -f%z "$backup_file" 2>/dev/null || stat -c%s "$backup_file" 2>/dev/null)
    
    # Find an available port
@@ -396,17 +367,15 @@ transfer_backup() {
    if $SSH_CMD "$DEST_HOST" "which screen" >/dev/null 2>&1; then
        echo "Starting screen listener on port $port..."
        
-        # Ship the listener as a SCRIPT FILE. tar_extract_opts can contain quoted
-        # --transform expressions with '|' which inline bash -c quoting cannot
-        # survive across the ssh+screen layers (broke the katana retry,
-        # 2026-07-11). The heredoc expands locally; the target parses the script
-        # exactly once.
-        $SSH_CMD "$DEST_HOST" "cat > /tmp/transfer_${key}.sh && chmod +x /tmp/transfer_${key}.sh" <<LISTENER
-#!/bin/bash
-nc -l -p $port | zstd -d | tar $tar_extract_opts 2>/tmp/transfer_${key}.err
-echo \$? > /tmp/transfer_${key}.done
-LISTENER
-        $SSH_CMD "$DEST_HOST" "screen -dmS transfer_${key} /tmp/transfer_${key}.sh"
+        # Start listener in screen session with proper escaping
+        # The backup file is already zstd compressed, so we just decompress and extract
+        # Use tar_extract_opts which may include --skip-old-files for SLOWDISK mode
+        $SSH_CMD "$DEST_HOST" "
+            screen -dmS transfer_${key} bash -c '
+                nc -l -p $port | zstd -d | tar $tar_extract_opts 2>/tmp/transfer_${key}.err
+                echo \$? > /tmp/transfer_${key}.done
+            '
+        "
        
        # Give it time to start
        sleep 2
@@ -420,13 +389,15 @@ LISTENER
    else
        echo "Screen not available, using nohup method..."
        
-        # Script-file listener for the same quoting reason as the screen branch.
-        $SSH_CMD "$DEST_HOST" "cat > /tmp/transfer_${key}.sh && chmod +x /tmp/transfer_${key}.sh" <<LISTENER
-#!/bin/bash
-nc -l -p $port | zstd -d | tar $tar_extract_opts 2>/tmp/transfer_${key}.err
-echo \$? > /tmp/transfer_${key}.done
-LISTENER
-        $SSH_CMD "$DEST_HOST" "nohup /tmp/transfer_${key}.sh > /tmp/transfer_${key}.log 2>&1 < /dev/null & echo \$! > /tmp/transfer_${key}.pid"
+        # Use nohup with proper backgrounding
+        # Use tar_extract_opts which may include --skip-old-files for SLOWDISK mode
+        $SSH_CMD "$DEST_HOST" "
+            nohup bash -c '
+                nc -l -p $port | zstd -d | tar $tar_extract_opts 2>/tmp/transfer_${key}.err
+                echo \$? > /tmp/transfer_${key}.done
+            ' > /tmp/transfer_${key}.log 2>&1 < /dev/null &
+            echo \$! > /tmp/transfer_${key}.pid
+        "
        
        sleep 2
        
@@ -510,7 +481,6 @@ LISTENER
 # Fallback: Direct SSH pipe
 transfer_backup_ssh() {
    local key=$1
-    local compose_file=$2
    local volume_name="rpc_$key"
    
    # Find the newest restorable backup file (skip near-empty artifacts)
@@ -518,17 +488,6 @@ transfer_backup_ssh() {
    backup_file=$(select_newest_local_backup "$backup_dir" "$volume_name")
    
    if [[ -z "$backup_file" ]] || [[ ! -f "$backup_file" ]]; then
-        if [[ "$volume_name" == *-secrets || "$volume_name" == *-jwt ]]; then
-            echo "Note: no backup for secrets/jwt volume $volume_name (regenerated at create-node), skipping"
-            return 2
-        fi
-        # Check if this volume is optional or ephemeral - if so, skip gracefully
-        if [[ -n "$compose_file" && -f "$compose_file" ]]; then
-            if is_ephemeral_volume_key "$key" "$compose_file" || is_optional_volume_key "$key" "$compose_file"; then
-                echo "Note: no backup for optional/ephemeral volume $volume_name (will be created empty at destination), skipping"
-                return 2
-            fi
-        fi
        echo "Warning: No restorable backup file found for $volume_name, skipping"
        return 1
    fi
@@ -554,7 +513,7 @@ transfer_backup_ssh() {
            if setup_slowdisk_structure "$key" "$static_size_kb" "${static_paths[@]}"; then
                # and --keep-directory-symlink so tar extracts THROUGH the pre-created dir symlinks
                # instead of trying to mkdir over them (which fails with 'Cannot mkdir: File exists')
-                tar_extract_opts="-xf - -C / --skip-old-files --keep-directory-symlink${SLOWDISK_TRANSFORMS}"
+                tar_extract_opts="-xf - -C / --skip-old-files --keep-directory-symlink"
                echo "SLOWDISK structure ready, will extract respecting symlinks"
            else
                echo "Warning: Failed to setup SLOWDISK structure, falling back to normal extraction"
@@ -564,17 +523,6 @@ transfer_backup_ssh() {
        fi
    fi
    
-
-    # AFTER SLOWDISK_TRANSFORMS: rewrite remaining var/lib/docker/ members onto
-    # the target's real docker root when it is a cross-device symlink (see
-    # docker_root_transform in volume-utils.sh).
-    local _drt
-    _drt=$(docker_root_transform)
-    if [[ -n "$_drt" ]]; then
-        echo "Target /var/lib/docker is a symlink; appending docker-root --transform (after slowdisk)"
-        tar_extract_opts="${tar_extract_opts}${_drt}"
-    fi
-
    echo "Using direct SSH transfer for $key (file: $(basename "$backup_file"), size: $((file_size / 1048576))MB)"
    
    pv -pterb -s "$file_size" -N "$key" < "$backup_file" | \
@@ -653,26 +601,18 @@ main() {
    echo "----------------------------------------"
    
    success_count=0
-    skipped_volumes=""
    failed_volumes=""
-
+    
    for key in $keys; do
        # Try nc method first
-        transfer_backup "$key" "$dir/$1.yml"
-        rc=$?
-
-        if [[ $rc -eq 2 ]]; then
-            # secrets volume with no backup — regenerated at create-node, not a failure
-            skipped_volumes="$skipped_volumes $key"
-        elif [[ $rc -ne 0 ]]; then
+        transfer_backup "$key"
+        
+        if [[ $? -ne 0 ]]; then
            echo "NC transfer failed, trying direct SSH..."
-            transfer_backup_ssh "$key" "$dir/$1.yml"
-            rc=$?
-
-            if [[ $rc -eq 0 ]]; then
+            transfer_backup_ssh "$key"
+            
+            if [[ $? -eq 0 ]]; then
                success_count=$((success_count + 1))
-            elif [[ $rc -eq 2 ]]; then
-                skipped_volumes="$skipped_volumes $key"
            else
                failed_volumes="$failed_volumes $key"
            fi
@@ -686,7 +626,6 @@ main() {
    echo ""
    echo "Transfer Summary:"
    echo "  Successful: $success_count/$volume_count"
-    [[ -n "$skipped_volumes" ]] && echo "  Skipped (no backup by design):$skipped_volumes"
    [[ -n "$failed_volumes" ]] && echo "  Failed:$failed_volumes"
    
    # Restore Network buffer and congestion control settings.
@@ -716,7 +655,7 @@ main() {
    $SSH_CMD -O exit "$DEST_HOST" 2>/dev/null
    
    # Exit with appropriate status (cleanup will be handled by trap)
-    [[ -z "$failed_volumes" ]] && exit 0 || exit 1
+    [[ $success_count -eq $volume_count ]] && exit 0 || exit 1
 }

 main "$@"
--- a/clone-node.sh
+++ b/clone-node.sh
@@ -200,7 +200,6 @@ setup_slowdisk_structure() {
        return 1
    fi
    
-    SLOWDISK_TRANSFORMS=""
    echo "Setting up SLOWDISK structure for $key"
    echo "  Static size: $((static_size_kb / 1024))MB"
    echo "  Static paths: ${#static_paths[@]}"
@@ -230,9 +229,6 @@ setup_slowdisk_structure() {
        local slowdisk_path="${slowdisk_base}/rpc_${key}__data_${path//\//__}"
        local target_path="${volume_path}/${path}"
        local target_dir=$(dirname "$target_path")
-        # tar cannot extract through a cross-device dir symlink (EXDEV) - rewrite
-        # member paths to land directly on /slowdisk (same fix as clone-backup).
-        SLOWDISK_TRANSFORMS+=" --transform='s|^\\(\\./\\)\\?var/lib/docker/volumes/rpc_${key}/_data/${path}|slowdisk/rpc_${key}__data_${path//\//__}|'"
        
        # Create parent directories in volume
        $SSH_CMD "$DEST_HOST" "mkdir -p '$target_dir'"
@@ -303,7 +299,7 @@ transfer_volume() {
                        # Use --skip-old-files to avoid overwriting existing symlinks/directories
                        # and --keep-directory-symlink so tar extracts THROUGH the pre-created dir symlinks
                        # instead of trying to mkdir over them (which fails with 'Cannot mkdir: File exists')
-                        tar_extract_opts="-xf - -C / --skip-old-files --keep-directory-symlink${SLOWDISK_TRANSFORMS}"
+                        tar_extract_opts="-xf - -C / --skip-old-files --keep-directory-symlink"
                        echo "SLOWDISK structure ready, will extract respecting symlinks"
                    else
                        echo "Warning: Failed to setup SLOWDISK structure, falling back to normal extraction"
@@ -319,17 +315,6 @@ transfer_volume() {
        fi
    fi
    
-
-    # AFTER SLOWDISK_TRANSFORMS: rewrite remaining var/lib/docker/ members onto
-    # the target's real docker root when it is a cross-device symlink (see
-    # docker_root_transform in volume-utils.sh).
-    local _drt
-    _drt=$(docker_root_transform)
-    if [[ -n "$_drt" ]]; then
-        echo "Target /var/lib/docker is a symlink; appending docker-root --transform (after slowdisk)"
-        tar_extract_opts="${tar_extract_opts}${_drt}"
-    fi
-
    # Find an available port
    local port=$(find_available_port)
    if [[ $? -ne 0 ]]; then
@@ -353,14 +338,12 @@ transfer_volume() {
        
        # Start listener in screen session with proper escaping
        # Use tar_extract_opts which may include --skip-old-files for SLOWDISK mode
-        # Script-file listener: tar_extract_opts may carry quoted --transform args
-        # that no inline bash -c quoting survives (same fix as clone-backup).
-        $SSH_CMD "$DEST_HOST" "cat > /tmp/transfer_${key}.sh && chmod +x /tmp/transfer_${key}.sh" <<LISTENER
-#!/bin/bash
-nc -l -p $port | zstd -d | tar $tar_extract_opts 2>/tmp/transfer_${key}.err
-echo \$? > /tmp/transfer_${key}.done
-LISTENER
-        $SSH_CMD "$DEST_HOST" "screen -dmS transfer_${key} /tmp/transfer_${key}.sh"
+        $SSH_CMD "$DEST_HOST" "
+            screen -dmS transfer_${key} bash -c '
+                nc -l -p $port | zstd -d | tar $tar_extract_opts 2>/tmp/transfer_${key}.err
+                echo \$? > /tmp/transfer_${key}.done
+            '
+        "
        
        # Give it time to start
        sleep 2
@@ -376,12 +359,13 @@ LISTENER
        
        # Use nohup with proper backgrounding
        # Use tar_extract_opts which may include --skip-old-files for SLOWDISK mode
-        $SSH_CMD "$DEST_HOST" "cat > /tmp/transfer_${key}.sh && chmod +x /tmp/transfer_${key}.sh" <<LISTENER
-#!/bin/bash
-nc -l -p $port | zstd -d | tar $tar_extract_opts 2>/tmp/transfer_${key}.err
-echo \$? > /tmp/transfer_${key}.done
-LISTENER
-        $SSH_CMD "$DEST_HOST" "nohup /tmp/transfer_${key}.sh > /tmp/transfer_${key}.log 2>&1 < /dev/null & echo \$! > /tmp/transfer_${key}.pid"
+        $SSH_CMD "$DEST_HOST" "
+            nohup bash -c '
+                nc -l -p $port | zstd -d | tar $tar_extract_opts 2>/tmp/transfer_${key}.err
+                echo \$? > /tmp/transfer_${key}.done
+            ' > /tmp/transfer_${key}.log 2>&1 < /dev/null &
+            echo \$! > /tmp/transfer_${key}.pid
+        "
        
        sleep 2
        
@@ -495,7 +479,7 @@ transfer_volume_ssh() {
                    if setup_slowdisk_structure "$key" "$static_size_kb" "${static_paths[@]}"; then
                        # and --keep-directory-symlink so tar extracts THROUGH the pre-created dir symlinks
                        # instead of trying to mkdir over them (which fails with 'Cannot mkdir: File exists')
-                        tar_extract_opts="-xf - -C / --skip-old-files --keep-directory-symlink${SLOWDISK_TRANSFORMS}"
+                        tar_extract_opts="-xf - -C / --skip-old-files --keep-directory-symlink"
                        echo "SLOWDISK structure ready, will extract respecting symlinks"
                    else
                        echo "Warning: Failed to setup SLOWDISK structure, falling back to normal extraction"
@@ -511,17 +495,6 @@ transfer_volume_ssh() {
        fi
    fi
    
-
-    # AFTER SLOWDISK_TRANSFORMS: rewrite remaining var/lib/docker/ members onto
-    # the target's real docker root when it is a cross-device symlink (see
-    # docker_root_transform in volume-utils.sh).
-    local _drt
-    _drt=$(docker_root_transform)
-    if [[ -n "$_drt" ]]; then
-        echo "Target /var/lib/docker is a symlink; appending docker-root --transform (after slowdisk)"
-        tar_extract_opts="${tar_extract_opts}${_drt}"
-    fi
-
    echo "Using direct SSH transfer for $key (size: $((folder_size / 1048576))MB)"
    
    tar -cf - --dereference "$source_folder" 2>/dev/null | \
--- a/compose_registry.json
+++ b/compose_registry.json
--- a/connect-peers.sh
+++ b/connect-peers.sh
@@ -9,11 +9,6 @@
 #   target-compose-file: Optional. If provided, use this compose file for target node
 #                        If not provided, use the same compose file for both source and target
 #
-# Secondary seed (optional): --seed-bootstrap pulls third-party enodes from the
-# public bootstrap API (https://stakesquid.eu/bootstrap/<network>.json) into the
-# source node after the pairwise connect — same JSON customers use; own peerset
-# remains primary via peer-reinject.sh / peer-capture.
-#
 # Exit codes:
 #   0 - At least one node connected successfully (bidirectional or one-way)
 #   1 - Failed to connect to both nodes (see output for details)
@@ -70,7 +65,6 @@ fi

 TIMEOUT=5
 DRY_RUN=false
-SEED_BOOTSTRAP=false

 while [[ $# -gt 0 ]]; do
    case "$1" in
@@ -82,10 +76,6 @@ while [[ $# -gt 0 ]]; do
            DRY_RUN=true
            shift
            ;;
-        --seed-bootstrap)
-            SEED_BOOTSTRAP=true
-            shift
-            ;;
        *)
            echo "Unknown option: $1"
            usage
@@ -610,30 +600,6 @@ fi
 echo -e "${CYAN}--- Summary ---${NC}"
 echo ""

-# Optional secondary seed from public bootstrap list (after pairwise connect).
-if [[ "$SEED_BOOTSTRAP" == true ]]; then
-    echo -e "${CYAN}--- Bootstrap secondary seed ---${NC}"
-    if [[ -x "$BASEPATH/bootstrap-peers.sh" ]]; then
-        if [[ "$DRY_RUN" == true ]]; then
-            "$BASEPATH/bootstrap-peers.sh" --from-compose "$COMPOSE_FILE" --dry-run || true
-        else
-            mapfile -t BOOT_ENODES < <("$BASEPATH/bootstrap-peers.sh" --from-compose "$COMPOSE_FILE" 2>/dev/null | grep -E '^enode://' | head -n 25 || true)
-            BOOT_OK=0
-            for be in "${BOOT_ENODES[@]:-}"; do
-                [[ -z "$be" ]] && continue
-                RESULT=$(add_static_peer "$SOURCE_URL" "$be" "$SOURCE_CLIENT")
-                if check_rpc_success "$RESULT"; then
-                    BOOT_OK=$((BOOT_OK + 1))
-                fi
-            done
-            echo -e "  Added ${GREEN}${BOOT_OK}${NC}/${#BOOT_ENODES[@]} bootstrap enodes to source"
-        fi
-    else
-        echo -e "${YELLOW}bootstrap-peers.sh not found — skip${NC}"
-    fi
-    echo ""
-fi
-
 if [[ "$DRY_RUN" == true ]]; then
    echo -e "${GREEN}Dry run completed - no changes made${NC}"
    echo ""
--- a/core/core/core-buffalo-core-pruned-pebble-path.yml
+++ b/core/core/core-buffalo-core-pruned-pebble-path.yml
@@ -115,7 +115,7 @@ x-upstreams:
          frameSize: 20Mb
          msgSize: 50Mb
          url: $${WS_URL}
-    chain:
+    chain: core-testnet
    method-groups:
      enabled:
        - debug
--- a/core/core/core-pigeon-core-pruned-pebble-path.yml
+++ b/core/core/core-pigeon-core-pruned-pebble-path.yml
@@ -115,7 +115,7 @@ x-upstreams:
          frameSize: 20Mb
          msgSize: 50Mb
          url: $${WS_URL}
-    chain: core-testnet
+    chain: core-pigeon
    method-groups:
      enabled:
        - debug
--- a/cosmos/gaiad/cosmos-mainnet-gaiad-pruned.yml
+++ b/cosmos/gaiad/cosmos-mainnet-gaiad-pruned.yml
@@ -35,7 +35,7 @@ services:
      dockerfile: cometbft.Dockerfile
      args:
        CL_IMAGE: ${COSMOS_GAIAD_IMAGE:-ghcr.io/cosmos/gaia}
-        CL_VERSION: ${COSMOS_MAINNET_GAIAD_VERSION:-v27.5.0}
+        CL_VERSION: ${COSMOS_MAINNET_GAIAD_VERSION:-v27.4.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/cronos-zkevm/external-node/cronos-zkevm-mainnet-external-node-archive.yml
+++ b/cronos-zkevm/external-node/cronos-zkevm-mainnet-external-node-archive.yml
@@ -33,7 +33,7 @@ x-logging-defaults: &logging-defaults

 services:
  cronos-zkevm-mainnet-archive:
-    image: ${CRONOS_ZKEVM_EXTERNAL_NODE_IMAGE:-ghcr.io/cronos-labs/external-node}:${CRONOS_ZKEVM_MAINNET_EXTERNAL_NODE_VERSION:-v31.3.0}
+    image: ${CRONOS_ZKEVM_EXTERNAL_NODE_IMAGE:-ghcr.io/cronos-labs/external-node}:${CRONOS_ZKEVM_MAINNET_EXTERNAL_NODE_VERSION:-v31.0.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/cronos-zkevm/external-node/cronos-zkevm-mainnet-external-node-pruned.yml
+++ b/cronos-zkevm/external-node/cronos-zkevm-mainnet-external-node-pruned.yml
@@ -33,7 +33,7 @@ x-logging-defaults: &logging-defaults

 services:
  cronos-zkevm-mainnet:
-    image: ${CRONOS_ZKEVM_EXTERNAL_NODE_IMAGE:-ghcr.io/cronos-labs/external-node}:${CRONOS_ZKEVM_MAINNET_EXTERNAL_NODE_VERSION:-v31.3.0}
+    image: ${CRONOS_ZKEVM_EXTERNAL_NODE_IMAGE:-ghcr.io/cronos-labs/external-node}:${CRONOS_ZKEVM_MAINNET_EXTERNAL_NODE_VERSION:-v31.0.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/cronos-zkevm/external-node/cronos-zkevm-testnet-external-node-archive.yml
+++ b/cronos-zkevm/external-node/cronos-zkevm-testnet-external-node-archive.yml
@@ -33,7 +33,7 @@ x-logging-defaults: &logging-defaults

 services:
  cronos-zkevm-testnet-archive:
-    image: ${CRONOS_ZKEVM_EXTERNAL_NODE_IMAGE:-ghcr.io/cronos-labs/external-node}:${CRONOS_ZKEVM_TESTNET_EXTERNAL_NODE_VERSION:-v31.3.0}
+    image: ${CRONOS_ZKEVM_EXTERNAL_NODE_IMAGE:-ghcr.io/cronos-labs/external-node}:${CRONOS_ZKEVM_TESTNET_EXTERNAL_NODE_VERSION:-v31.0.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/cronos-zkevm/external-node/cronos-zkevm-testnet-external-node-pruned.yml
+++ b/cronos-zkevm/external-node/cronos-zkevm-testnet-external-node-pruned.yml
@@ -33,7 +33,7 @@ x-logging-defaults: &logging-defaults

 services:
  cronos-zkevm-testnet:
-    image: ${CRONOS_ZKEVM_EXTERNAL_NODE_IMAGE:-ghcr.io/cronos-labs/external-node}:${CRONOS_ZKEVM_TESTNET_EXTERNAL_NODE_VERSION:-v31.3.0}
+    image: ${CRONOS_ZKEVM_EXTERNAL_NODE_IMAGE:-ghcr.io/cronos-labs/external-node}:${CRONOS_ZKEVM_TESTNET_EXTERNAL_NODE_VERSION:-v31.0.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/cronos/cometbft.Dockerfile
+++ b/cronos/cometbft.Dockerfile
@@ -7,12 +7,8 @@ FROM alpine:3.21
 RUN apk add --no-cache ca-certificates curl jq

 ARG CRONOS_CRONOS_VERSION
-# Version may carry a "-testnet" suffix (e.g. v1.7.8-testnet): the release TAG is the
-# base version, the ASSET keeps the suffix (testnet builds use tcrc bech32 prefixes -
-# a mainnet binary cannot parse testnet validator addresses).
 RUN _ver="${CRONOS_CRONOS_VERSION#v}" && \
-    _tag="v${_ver%-testnet}" && \
-    curl -fsSL "https://github.com/crypto-org-chain/cronos/releases/download/${_tag}/cronos_${_ver}_Linux_x86_64.tar.gz" \
+    curl -fsSL "https://github.com/crypto-org-chain/cronos/releases/download/${CRONOS_CRONOS_VERSION}/cronos_${_ver}_Linux_x86_64.tar.gz" \
      -o /tmp/cronos.tar.gz && \
    tar -xzf /tmp/cronos.tar.gz -C /tmp && \
    install -m 755 /tmp/bin/cronosd /usr/local/bin/cronosd && \
--- a/cronos/cronos/cronos-testnet-cronos-pruned.yml
+++ b/cronos/cronos/cronos-testnet-cronos-pruned.yml
@@ -1,138 +0,0 @@
---
-x-logging-defaults: &logging-defaults
-  driver: json-file
-  options:
-    max-size: "512m"
-    max-file: "2"
-
-# Usage:
-#
-# mkdir rpc && cd rpc
-#
-# git init
-# git remote add origin https://github.com/StakeSquid/ethereum-rpc-docker.git
-# git fetch origin vibe
-# git checkout origin/vibe
-#
-# docker run --rm alpine sh -c "printf '0x'; head -c32 /dev/urandom | xxd -p -c 64" > .jwtsecret
-#
-# env
-# ...
-# IP=$(curl ipinfo.io/ip)
-# DOMAIN=${IP}.traefik.me
-# COMPOSE_FILE=base.yml:rpc.yml:cronos/cronos/cronos-testnet-cronos-pruned.yml
-#
-# docker compose up -d
-#
-# curl -X POST https://${IP}.traefik.me/cronos-testnet \
-#   -H "Content-Type: application/json" \
-#   --data '{"jsonrpc":"2.0","method":"eth_blockNumber","params":[],"id":1}'
-
-services:
-  cronos-testnet:
-    build:
-      context: ./cronos
-      dockerfile: cometbft.Dockerfile
-      args:
-        CRONOS_CRONOS_VERSION: ${CRONOS_TESTNET_CRONOS_VERSION:-v1.7.8-testnet}
-    sysctls:
-      # TCP Performance
-      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
-      net.ipv4.tcp_no_metrics_save: 1             # Disable metrics cache
-      net.ipv4.tcp_rmem: 4096 87380 16777216      # Increase TCP read buffers
-      net.ipv4.tcp_wmem: 4096 87380 16777216      # Increase TCP write buffers
-      net.core.somaxconn: 32768                   # Higher connection queue
-      # Memory/Connection Management
-      # net.core.netdev_max_backlog: 50000          # Increase network buffer
-      net.ipv4.tcp_max_syn_backlog: 30000         # More SYN requests
-      net.ipv4.tcp_max_tw_buckets: 2000000        # Allow more TIME_WAIT sockets
-    ulimits:
-      nofile: 1048576    # Max open files (for RPC/WS connections)
-    user: root
-    ports:
-      - 10521:10521
-      - 10521:10521/udp
-    expose:
-      - 8545
-      - 8546
-      - 6066
-      - 26657
-    environment:
-      - API=eth,txpool,net,debug,web3
-      - CHAINID=cronostestnet_338-3
-      - EVM_MAX_TX_GAS_WANTED=500000
-      - GENESIS_URL=https://raw.githubusercontent.com/crypto-org-chain/cronos-testnets/main/cronostestnet_338-3/genesis.json
-      - IP=${IP}
-      - JSON_RPC_BLOCK_RANGE_CAP=10000
-      - JSON_RPC_ENABLE=true
-      - JSON_RPC_ENABLE_INDEXER=true
-      - JSON_RPC_FEEHISTORY_CAP=100
-      - JSON_RPC_HTTP_TIMEOUT=30s
-      - JSON_RPC_LOGS_CAP=10000
-      - MIN_GAS=5000000000000basetcro
-      - MONIKER=d${DOMAIN:-local}
-      - P2P_PORT=10521
-      - PRUNING=custom
-      - PRUNING_INTERVAL=19
-      - PRUNING_KEEP_RECENT=100
-      - SEEDS=8fcba3485c67a2a00a383b6f45660a4ac529c6ca@52.77.30.18:26656,e65199bc579ffd89d7c021c5611f9f1c97f7ff13@54.251.209.254:26656,b8e6d6e16d236fa6a7101316d96de718200c500c@bd-cronos-testnet-seed-node-01.bdnodes.net:26656
-      - STATESYNC_RPC=https://rpc-t3.cronos.org:443
-    restart: unless-stopped
-    stop_grace_period: 5m
-    networks:
-      - chains
-    volumes:
-      - ${CRONOS_TESTNET_CRONOS_PRUNED_DATA:-cronos-testnet-cronos-pruned}:/root/.cronos/data
-      - /slowdisk:/slowdisk
-      - cronos-testnet-cronos-pruned_config:/root/.cronos/config
-    logging: *logging-defaults
-    labels:
-      - prometheus-scrape.enabled=true
-      - prometheus-scrape.port=6066
-      - prometheus-scrape.path=/metrics
-      - traefik.enable=true
-      - traefik.http.middlewares.cronos-testnet-cronos-pruned-stripprefix.stripprefix.prefixes=/cronos-testnet
-      - traefik.http.services.cronos-testnet-cronos-pruned.loadbalancer.server.port=8545
-      - ${NO_SSL:-traefik.http.routers.cronos-testnet-cronos-pruned.entrypoints=websecure}
-      - ${NO_SSL:-traefik.http.routers.cronos-testnet-cronos-pruned.tls.certresolver=myresolver}
-      - ${NO_SSL:-traefik.http.routers.cronos-testnet-cronos-pruned.rule=Host(`$DOMAIN`) && (Path(`/cronos-testnet`) || Path(`/cronos-testnet/`))}
-      - ${NO_SSL:+traefik.http.routers.cronos-testnet-cronos-pruned.rule=Path(`/cronos-testnet`) || Path(`/cronos-testnet/`)}
-      - traefik.http.routers.cronos-testnet-cronos-pruned.middlewares=cronos-testnet-cronos-pruned-stripprefix, ipallowlist
-      - traefik.http.routers.cronos-testnet-cronos-pruned.priority=50   # gets any request that is not GET with UPGRADE header
-      - traefik.http.routers.cronos-testnet-cronos-pruned-ws.priority=100   # answers GET requests first
-      - traefik.http.services.cronos-testnet-cronos-pruned-ws.loadbalancer.server.port=8546
-      - traefik.http.routers.cronos-testnet-cronos-pruned-ws.service=cronos-testnet-cronos-pruned-ws
-      - traefik.http.routers.cronos-testnet-cronos-pruned.service=cronos-testnet-cronos-pruned
-      - ${NO_SSL:-traefik.http.routers.cronos-testnet-cronos-pruned-ws.entrypoints=websecure}
-      - ${NO_SSL:-traefik.http.routers.cronos-testnet-cronos-pruned-ws.tls.certresolver=myresolver}
-      # case-insensitive Upgrade: python websocket-client sends "WebSocket" (capital W)
-      - ${NO_SSL:-traefik.http.routers.cronos-testnet-cronos-pruned-ws.rule=Host(`$DOMAIN`) && (Path(`/cronos-testnet`) || Path(`/cronos-testnet/`)) && HeadersRegexp(`Upgrade`, `(?i)websocket`)}
-      - ${NO_SSL:+traefik.http.routers.cronos-testnet-cronos-pruned-ws.rule=(Path(`/cronos-testnet`) || Path(`/cronos-testnet/`)) && HeadersRegexp(`Upgrade`, `(?i)websocket`)}
-      - traefik.http.routers.cronos-testnet-cronos-pruned-ws.middlewares=cronos-testnet-cronos-pruned-stripprefix, ipallowlist
-
-volumes:
-  cronos-testnet-cronos-pruned:
-  cronos-testnet-cronos-pruned_config:
-
-x-upstreams:
-  - id: $${ID}
-    labels:
-      provider: $${PROVIDER}
-    connection:
-      generic:
-        rpc:
-          url: $${RPC_URL}
-        ws:
-          frameSize: 20Mb
-          msgSize: 50Mb
-          url: $${WS_URL}
-    chain: cronos-testnet
-    method-groups:
-      enabled:
-        - debug
-        - filter
-    methods:
-      disabled:
-      enabled:
-        - name: txpool_content # TODO: should be disabled for rollup nodes
-...
--- a/cronos/scripts/init.sh
+++ b/cronos/scripts/init.sh
@@ -22,7 +22,6 @@ JSON_RPC_FEEHISTORY_CAP="${JSON_RPC_FEEHISTORY_CAP:-100}"
 JSON_RPC_LOGS_CAP="${JSON_RPC_LOGS_CAP:-10000}"
 JSON_RPC_BLOCK_RANGE_CAP="${JSON_RPC_BLOCK_RANGE_CAP:-10000}"
 JSON_RPC_HTTP_TIMEOUT="${JSON_RPC_HTTP_TIMEOUT:-30s}"
-JSON_RPC_WS_ORIGINS="${JSON_RPC_WS_ORIGINS:-*}"
 EVM_MAX_TX_GAS_WANTED="${EVM_MAX_TX_GAS_WANTED:-500000}"

 ct_apk curl jq
@@ -43,7 +42,6 @@ sed -i -e "s/^indexer *=.*/indexer = \"null\"/" "$CONFIG_DIR/config.toml"

 sed -i "/^\[json-rpc\]/,/^\[/{s|^address = .*|address = \"0.0.0.0:8545\"|}" "$CONFIG_DIR/app.toml"
 sed -i "/^\[json-rpc\]/,/^\[/{s|^ws-address = .*|ws-address = \"0.0.0.0:8546\"|}" "$CONFIG_DIR/app.toml"
-sed -i "/^\[json-rpc\]/,/^\[/{s|^ws-origins = .*|ws-origins = \"$JSON_RPC_WS_ORIGINS\"|}" "$CONFIG_DIR/app.toml"
 sed -i "/^\[json-rpc\]/,/^\[/{s|^api = .*|api = \"$API\"|}" "$CONFIG_DIR/app.toml"
 sed -i "/^\[json-rpc\]/,/^\[/{s|^enable = .*|enable = $JSON_RPC_ENABLE|}" "$CONFIG_DIR/app.toml"
 sed -i "/^\[json-rpc\]/,/^\[/{s|^enable-indexer = .*|enable-indexer = $JSON_RPC_ENABLE_INDEXER|}" "$CONFIG_DIR/app.toml"
--- a/digibyte/digibyted.Dockerfile
+++ b/digibyte/digibyted.Dockerfile
@@ -1,10 +1,10 @@
 # digibyted — official release tarball (no Docker image upstream).
-ARG VERSION=9.26.5
+ARG VERSION=9.26.4

 FROM debian:stable-slim

 ARG VERSION
-ARG SHA256=37f6bf6a682f99b5966c2bd3f0cfe3013b60b7b55268958663231ebbf9e56773
+ARG SHA256=523da7ac9ee0f1bcb38ff75da6f01997b9491a9eee1e2b0ce3c90f60b2aaa9b3

 RUN apt-get update && apt-get install -y --no-install-recommends \
    ca-certificates \
--- a/digibyte/digibyted/digibyte-mainnet-digibyted-full.yml
+++ b/digibyte/digibyted/digibyte-mainnet-digibyted-full.yml
@@ -34,7 +34,7 @@ services:
      context: ./digibyte
      dockerfile: digibyted.Dockerfile
      args:
-        VERSION: ${DIGIBYTE_MAINNET_DIGIBYTED_VERSION:-9.26.5}
+        VERSION: ${DIGIBYTE_MAINNET_DIGIBYTED_VERSION:-9.26.4}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/drpc-free.yml
+++ b/drpc-free.yml
@@ -1,6 +1,6 @@
 services:
  dshackle-free:
-    image: ${DSHACKLE_IMAGE:-stakesquid/dshackle:0.79.11-ss2@sha256:624866381b672e051042f4f383fb19af1d9d4e508929ac92b2d70db3212ead92}
+    image: drpcorg/dshackle:0.79.10
    restart: unless-stopped
    volumes:
      - ./free_configs:/etc/dshackle
@@ -30,7 +30,7 @@ services:
    restart: unless-stopped
    command:
      - "redis-server"
-      - "--maxmemory ${GW_FREE_REDIS_RAM:-512MB}"
+      - "--maxmemory ${GW_FREE_REDIS_RAM}"
      - "--maxmemory-policy allkeys-lru"
      - '--save ""'
    networks:
--- a/drpc.yml
+++ b/drpc.yml
@@ -1,35 +1,12 @@
 services:
-  # Streams the dshackle access log (NDJSON, one line per response) to the splits
-  # listener on the insights host. Deliberately decoupled from dshackle via the
-  # file: a dead listener or slow link only ever stalls this sidecar, never the
-  # gateway. tail -F follows logrotate copytruncate; on disconnect the retry
-  # loop resumes at the file END (bounded loss, no duplication floods) — the
-  # per-gateway prometheus-vs-lines reconciliation on the listener side makes
-  # any gap visible within the hour.
-  accesslog-shipper:
-    image: busybox:1.36
-    restart: unless-stopped
-    volumes:
-      - ./dshackle_logs:/logs:ro
-      # sent-line counter: injects __shipstat__ checkpoints into the stream so
-      # the listener cruncher can reconcile shipped-vs-ingested per gateway/hour
-      # (fixes the time-based completeness floor being blind to event-loss-by-
-      # rotation, 2026-07-10). Cruncher MUST filter __shipstat__ from events.
-      - ./accesslog-shipper.awk:/shipper.awk:ro
-    command: >-
-      sh -c 'while true; do
-      tail -F /logs/access_log.jsonl 2>/dev/null | awk -f /shipper.awk | nc ${SPLITS_LISTENER_HOST:-78.47.193.225} ${SPLITS_LISTENER_PORT:-9102};
-      echo shipper lost listener connection, retrying in 10s;
-      sleep 10; done'
-
  dshackle:
-    image: ${DSHACKLE_IMAGE:-stakesquid/dshackle:0.79.11-ss2@sha256:624866381b672e051042f4f383fb19af1d9d4e508929ac92b2d70db3212ead92}
+    image: drpcorg/dshackle:0.79.10
    restart: unless-stopped
    volumes:
      - ./main_configs:/etc/dshackle
      # dshackle accessLog target (main_configs/dshackle.yaml accessLog.filename=/logs/...).
-      # Host-side dir so the shipper sidecar above can stream gateway->region request
-      # shares (earnings misattribution fix, operator + claude-machine design 2026-07-09).
+      # Host-side dir so the splits tailer can aggregate gateway->region request shares
+      # (earnings misattribution fix, operator + claude-machine design 2026-07-09).
      - ./dshackle_logs:/logs
    expose:
      - 8080
@@ -39,8 +16,6 @@ services:
    #  - "2449:2449"
    environment:
      DSHACKLE_LOG_LEVEL: ${DSHACKLE_LOG_LEVEL:-info}
-      # Cap JVM heap (image default is -Xms1024M with no -Xmx).
-      JAVA_OPTS: "-Xms1g -Xmx4g"
    labels:
      - "prometheus-scrape.enabled=true"
      - "prometheus-scrape.port=8081"
--- a/erigon3.Dockerfile
+++ b/erigon3.Dockerfile
@@ -1,6 +1,6 @@
 # syntax = docker/dockerfile:1.2
 ARG REPO=https://github.com/erigontech/erigon.git
-ARG VERSION=v3.5.3
+ARG VERSION=v3.4.4
 ARG COMMIT=${COMMIT:-${VERSION}}

 FROM docker.io/library/golang:1.24.1-alpine3.20 AS builder
--- a/ethereum/besu/ethereum-mainnet-besu-pruned-bonsai--nimbus.yml
+++ b/ethereum/besu/ethereum-mainnet-besu-pruned-bonsai--nimbus.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-mainnet-besu:
-    image: ${ETHEREUM_BESU_IMAGE:-hyperledger/besu}:${ETHEREUM_MAINNET_BESU_VERSION:-26.7.1}
+    image: ${ETHEREUM_BESU_IMAGE:-hyperledger/besu}:${ETHEREUM_MAINNET_BESU_VERSION:-26.6.1}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -115,7 +115,7 @@ services:
      - traefik.http.routers.ethereum-mainnet-besu-pruned-bonsai-ws.middlewares=ethereum-mainnet-besu-pruned-bonsai-stripprefix, ipallowlist

  ethereum-mainnet-besu-node:
-    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_MAINNET_NIMBUS_VERSION:-multiarch-v26.7.0}
+    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_MAINNET_NIMBUS_VERSION:-multiarch-v26.6.2}
    user: root
    ports:
      - 18205:18205
@@ -189,15 +189,8 @@ x-upstreams:
    chain: eth-beacon-chain
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-mainnet-besu-pruned-bonsai_nimbus]
 ...
--- a/ethereum/erigon3/ethereum-hoodi-erigon3-archive-trace.yml
+++ b/ethereum/erigon3/ethereum-hoodi-erigon3-archive-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-hoodi-erigon3-archive:
-    image: ${ETHEREUM_ERIGON3_IMAGE:-erigontech/erigon}:${ETHEREUM_HOODI_ERIGON3_VERSION:-v3.5.3}
+    image: ${ETHEREUM_ERIGON3_IMAGE:-erigontech/erigon}:${ETHEREUM_HOODI_ERIGON3_VERSION:-v3.5.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/ethereum/erigon3/ethereum-hoodi-erigon3-minimal-trace.yml
+++ b/ethereum/erigon3/ethereum-hoodi-erigon3-minimal-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-hoodi-erigon3-minimal:
-    image: ${ETHEREUM_ERIGON3_IMAGE:-erigontech/erigon}:${ETHEREUM_HOODI_ERIGON3_VERSION:-v3.5.3}
+    image: ${ETHEREUM_ERIGON3_IMAGE:-erigontech/erigon}:${ETHEREUM_HOODI_ERIGON3_VERSION:-v3.5.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/ethereum/erigon3/ethereum-hoodi-erigon3-pruned-trace.yml
+++ b/ethereum/erigon3/ethereum-hoodi-erigon3-pruned-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-hoodi-erigon3:
-    image: ${ETHEREUM_ERIGON3_IMAGE:-erigontech/erigon}:${ETHEREUM_HOODI_ERIGON3_VERSION:-v3.5.3}
+    image: ${ETHEREUM_ERIGON3_IMAGE:-erigontech/erigon}:${ETHEREUM_HOODI_ERIGON3_VERSION:-v3.5.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/ethereum/erigon3/ethereum-mainnet-erigon3-archive-trace.yml
+++ b/ethereum/erigon3/ethereum-mainnet-erigon3-archive-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-mainnet-erigon3-archive:
-    image: ${ETHEREUM_ERIGON3_IMAGE:-erigontech/erigon}:${ETHEREUM_MAINNET_ERIGON3_VERSION:-v3.5.3}
+    image: ${ETHEREUM_ERIGON3_IMAGE:-erigontech/erigon}:${ETHEREUM_MAINNET_ERIGON3_VERSION:-v3.5.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/ethereum/erigon3/ethereum-mainnet-erigon3-minimal-trace.yml
+++ b/ethereum/erigon3/ethereum-mainnet-erigon3-minimal-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-mainnet-erigon3-minimal:
-    image: ${ETHEREUM_ERIGON3_IMAGE:-erigontech/erigon}:${ETHEREUM_MAINNET_ERIGON3_VERSION:-v3.5.3}
+    image: ${ETHEREUM_ERIGON3_IMAGE:-erigontech/erigon}:${ETHEREUM_MAINNET_ERIGON3_VERSION:-v3.5.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/ethereum/erigon3/ethereum-mainnet-erigon3-pruned-trace.yml
+++ b/ethereum/erigon3/ethereum-mainnet-erigon3-pruned-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-mainnet-erigon3:
-    image: ${ETHEREUM_ERIGON3_IMAGE:-erigontech/erigon}:${ETHEREUM_MAINNET_ERIGON3_VERSION:-v3.5.3}
+    image: ${ETHEREUM_ERIGON3_IMAGE:-erigontech/erigon}:${ETHEREUM_MAINNET_ERIGON3_VERSION:-v3.5.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/ethereum/erigon3/ethereum-sepolia-erigon3-archive-trace.yml
+++ b/ethereum/erigon3/ethereum-sepolia-erigon3-archive-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-sepolia-erigon3-archive:
-    image: ${ETHEREUM_ERIGON3_IMAGE:-erigontech/erigon}:${ETHEREUM_SEPOLIA_ERIGON3_VERSION:-v3.5.3}
+    image: ${ETHEREUM_ERIGON3_IMAGE:-erigontech/erigon}:${ETHEREUM_SEPOLIA_ERIGON3_VERSION:-v3.5.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/ethereum/erigon3/ethereum-sepolia-erigon3-minimal-trace.yml
+++ b/ethereum/erigon3/ethereum-sepolia-erigon3-minimal-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-sepolia-erigon3-minimal:
-    image: ${ETHEREUM_ERIGON3_IMAGE:-erigontech/erigon}:${ETHEREUM_SEPOLIA_ERIGON3_VERSION:-v3.5.3}
+    image: ${ETHEREUM_ERIGON3_IMAGE:-erigontech/erigon}:${ETHEREUM_SEPOLIA_ERIGON3_VERSION:-v3.5.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/ethereum/erigon3/ethereum-sepolia-erigon3-pruned-trace.yml
+++ b/ethereum/erigon3/ethereum-sepolia-erigon3-pruned-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-sepolia-erigon3:
-    image: ${ETHEREUM_ERIGON3_IMAGE:-erigontech/erigon}:${ETHEREUM_SEPOLIA_ERIGON3_VERSION:-v3.5.3}
+    image: ${ETHEREUM_ERIGON3_IMAGE:-erigontech/erigon}:${ETHEREUM_SEPOLIA_ERIGON3_VERSION:-v3.5.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/ethereum/geth/ethereum-hoodi-geth-pruned-pebble-path--nimbus.yml
+++ b/ethereum/geth/ethereum-hoodi-geth-pruned-pebble-path--nimbus.yml
@@ -103,7 +103,7 @@ services:
      - traefik.http.routers.ethereum-hoodi-geth-pruned-pebble-path.middlewares=ethereum-hoodi-geth-pruned-pebble-path-stripprefix, ipallowlist

  ethereum-hoodi-geth-node:
-    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_HOODI_NIMBUS_VERSION:-multiarch-v26.7.0}
+    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_HOODI_NIMBUS_VERSION:-multiarch-v26.6.2}
    user: root
    ports:
      - 16917:16917
@@ -195,15 +195,8 @@ x-upstreams:
    chain: eth-beacon-chain-hoodi
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-hoodi-geth-pruned-pebble-path_nimbus]
 ...
--- a/ethereum/geth/ethereum-hoodi-geth-pruned-pebble-path.yml
+++ b/ethereum/geth/ethereum-hoodi-geth-pruned-pebble-path.yml
@@ -103,7 +103,7 @@ services:
      - traefik.http.routers.ethereum-hoodi-geth-pruned-pebble-path.middlewares=ethereum-hoodi-geth-pruned-pebble-path-stripprefix, ipallowlist

  ethereum-hoodi-geth-node:
-    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_HOODI_PRYSM_VERSION:-v7.1.7}
+    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_HOODI_PRYSM_VERSION:-v7.1.4}
    ports:
      - 16917:16917
      - 16917:16917/udp
@@ -196,15 +196,8 @@ x-upstreams:
    chain: eth-beacon-chain-hoodi
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-hoodi-geth-pruned-pebble-path_prysm]
 ...
--- a/ethereum/geth/ethereum-mainnet-geth-minimal-pebble-path.yml
+++ b/ethereum/geth/ethereum-mainnet-geth-minimal-pebble-path.yml
@@ -107,7 +107,7 @@ services:
      - traefik.http.routers.ethereum-mainnet-geth-minimal-pebble-path.middlewares=ethereum-mainnet-geth-minimal-pebble-path-stripprefix, ipallowlist

  ethereum-mainnet-geth-minimal-node:
-    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_MAINNET_PRYSM_VERSION:-v7.1.7}
+    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_MAINNET_PRYSM_VERSION:-v7.1.6}
    ports:
      - 19551:19551
      - 19551:19551/udp
@@ -200,15 +200,8 @@ x-upstreams:
    chain: eth-beacon-chain
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-mainnet-geth-minimal-pebble-path_prysm]
 ...
--- a/ethereum/geth/ethereum-mainnet-geth-pruned-leveldb-hash--nimbus--fireeth.yml
+++ b/ethereum/geth/ethereum-mainnet-geth-pruned-leveldb-hash--nimbus--fireeth.yml
@@ -168,7 +168,7 @@ services:
      - traefik.http.routers.ethereum-mainnet-geth-pruned-leveldb-hash-events.middlewares=ipallowlist

  ethereum-mainnet-geth-node:
-    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_MAINNET_NIMBUS_VERSION:-multiarch-v26.7.0}
+    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_MAINNET_NIMBUS_VERSION:-multiarch-v26.6.2}
    user: root
    ports:
      - 15455:15455
@@ -259,15 +259,8 @@ x-upstreams:
    chain: eth-beacon-chain
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-mainnet-geth-pruned-leveldb-hash_nimbus]
 ...
--- a/ethereum/geth/ethereum-mainnet-geth-pruned-pebble-path--nimbus--fireeth.yml
+++ b/ethereum/geth/ethereum-mainnet-geth-pruned-pebble-path--nimbus--fireeth.yml
@@ -168,7 +168,7 @@ services:
      - traefik.http.routers.ethereum-mainnet-geth-pruned-pebble-path-events.middlewares=ipallowlist

  ethereum-mainnet-geth-node:
-    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_MAINNET_NIMBUS_VERSION:-multiarch-v26.7.0}
+    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_MAINNET_NIMBUS_VERSION:-multiarch-v26.6.2}
    user: root
    ports:
      - 17023:17023
@@ -261,15 +261,8 @@ x-upstreams:
    chain: eth-beacon-chain
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-mainnet-geth-pruned-pebble-path_nimbus]
 ...
--- a/ethereum/geth/ethereum-mainnet-geth-pruned-pebble-path--nimbus.yml
+++ b/ethereum/geth/ethereum-mainnet-geth-pruned-pebble-path--nimbus.yml
@@ -103,7 +103,7 @@ services:
      - traefik.http.routers.ethereum-mainnet-geth-pruned-pebble-path.middlewares=ethereum-mainnet-geth-pruned-pebble-path-stripprefix, ipallowlist

  ethereum-mainnet-geth-node:
-    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_MAINNET_NIMBUS_VERSION:-multiarch-v26.7.0}
+    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_MAINNET_NIMBUS_VERSION:-multiarch-v26.6.2}
    user: root
    ports:
      - 17023:17023
@@ -195,15 +195,8 @@ x-upstreams:
    chain: eth-beacon-chain
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-mainnet-geth-pruned-pebble-path_nimbus]
 ...
--- a/ethereum/geth/ethereum-mainnet-geth-pruned-pebble-path.yml
+++ b/ethereum/geth/ethereum-mainnet-geth-pruned-pebble-path.yml
@@ -103,7 +103,7 @@ services:
      - traefik.http.routers.ethereum-mainnet-geth-pruned-pebble-path.middlewares=ethereum-mainnet-geth-pruned-pebble-path-stripprefix, ipallowlist

  ethereum-mainnet-geth-node:
-    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_MAINNET_PRYSM_VERSION:-v7.1.7}
+    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_MAINNET_PRYSM_VERSION:-v7.1.6}
    ports:
      - 17023:17023
      - 17023:17023/udp
@@ -196,15 +196,8 @@ x-upstreams:
    chain: eth-beacon-chain
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-mainnet-geth-pruned-pebble-path_prysm]
 ...
--- a/ethereum/geth/ethereum-sepolia-geth-pruned-pebble-path--nimbus.yml
+++ b/ethereum/geth/ethereum-sepolia-geth-pruned-pebble-path--nimbus.yml
@@ -103,7 +103,7 @@ services:
      - traefik.http.routers.ethereum-sepolia-geth-pruned-pebble-path.middlewares=ethereum-sepolia-geth-pruned-pebble-path-stripprefix, ipallowlist

  ethereum-sepolia-geth-node:
-    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_SEPOLIA_NIMBUS_VERSION:-multiarch-v26.7.0}
+    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_SEPOLIA_NIMBUS_VERSION:-multiarch-v26.6.2}
    user: root
    ports:
      - 19710:19710
@@ -195,15 +195,8 @@ x-upstreams:
    chain: eth-beacon-chain-sepolia
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-sepolia-geth-pruned-pebble-path_nimbus]
 ...
--- a/ethereum/geth/ethereum-sepolia-geth-pruned-pebble-path.yml
+++ b/ethereum/geth/ethereum-sepolia-geth-pruned-pebble-path.yml
@@ -103,7 +103,7 @@ services:
      - traefik.http.routers.ethereum-sepolia-geth-pruned-pebble-path.middlewares=ethereum-sepolia-geth-pruned-pebble-path-stripprefix, ipallowlist

  ethereum-sepolia-geth-node:
-    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_SEPOLIA_PRYSM_VERSION:-v7.1.7}
+    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_SEPOLIA_PRYSM_VERSION:-v7.1.4}
    ports:
      - 19710:19710
      - 19710:19710/udp
@@ -196,15 +196,8 @@ x-upstreams:
    chain: eth-beacon-chain-sepolia
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-sepolia-geth-pruned-pebble-path_prysm]
 ...
--- a/ethereum/nethermind/ethereum-hoodie-nethermind-pruned-rocksdb-trace--nimbus.yml
+++ b/ethereum/nethermind/ethereum-hoodie-nethermind-pruned-rocksdb-trace--nimbus.yml
@@ -20,17 +20,17 @@ x-logging-defaults: &logging-defaults
 # ...
 # IP=$(curl ipinfo.io/ip)
 # DOMAIN=${IP}.traefik.me
-# COMPOSE_FILE=base.yml:rpc.yml:ethereum/nethermind/ethereum-hoodi-nethermind-pruned-rocksdb-trace--nimbus.yml
+# COMPOSE_FILE=base.yml:rpc.yml:ethereum/nethermind/ethereum-hoodie-nethermind-pruned-rocksdb-trace--nimbus.yml
 #
 # docker compose up -d
 #
-# curl -X POST https://${IP}.traefik.me/ethereum-hoodi-nethermind \
+# curl -X POST https://${IP}.traefik.me/ethereum-hoodie-nethermind \
 #   -H "Content-Type: application/json" \
 #   --data '{"jsonrpc":"2.0","method":"eth_blockNumber","params":[],"id":1}'

 services:
-  ethereum-hoodi-nethermind:
-    image: ${ETHEREUM_NETHERMIND_IMAGE:-nethermind/nethermind}:${ETHEREUM_HOODI_NETHERMIND_VERSION:-1.39.1}
+  ethereum-hoodie-nethermind:
+    image: ${ETHEREUM_NETHERMIND_IMAGE:-nethermind/nethermind}:${ETHEREUM_HOODIE_NETHERMIND_VERSION:-1.37.2}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -46,13 +46,13 @@ services:
      nofile: 1048576    # Max open files (for RPC/WS connections)
    user: root
    ports:
-      - 10786:10786
-      - 10786:10786/udp
+      - 11214:11214
+      - 11214:11214/udp
    expose:
      - 8545
      - 9091
    environment:
-      - NETHERMIND_CONFIG=hoodi
+      - NETHERMIND_CONFIG=hoodie
      - NETHERMIND_INITCONFIG_BASEDBPATH=/data/db
      - NETHERMIND_INITCONFIG_LOGDIRECTORY=/data/logs
      - NETHERMIND_INITCONFIG_WEBSOCKETSENABLED=true
@@ -65,10 +65,10 @@ services:
      - NETHERMIND_JSONRPCCONFIG_PORT=8545
      - NETHERMIND_JSONRPCCONFIG_WEBSOCKETSPORT=8545
      - NETHERMIND_METRICSCONFIG_EXPOSEPORT=9091
-      - NETHERMIND_NETWORKCONFIG_DISCOVERYPORT=10786
+      - NETHERMIND_NETWORKCONFIG_DISCOVERYPORT=11214
      - NETHERMIND_NETWORKCONFIG_EXTERNALIP=${IP}
      - NETHERMIND_NETWORKCONFIG_MAXACTIVEPEERS=250
-      - NETHERMIND_NETWORKCONFIG_P2PPORT=10786
+      - NETHERMIND_NETWORKCONFIG_P2PPORT=11214
      - NETHERMIND_TRACESTORECONFIG_ENABLED=true
      - NETHERMIND_TRACESTORECONFIG_TRACETYPES=Trace,Rewards
    restart: unless-stopped
@@ -76,7 +76,7 @@ services:
    networks:
      - chains
    volumes:
-      - ${ETHEREUM_HOODI_NETHERMIND_PRUNED_ROCKSDB_TRACE_DATA:-ethereum-hoodi-nethermind-pruned-rocksdb-trace}:/data
+      - ${ETHEREUM_HOODIE_NETHERMIND_PRUNED_ROCKSDB_TRACE_DATA:-ethereum-hoodie-nethermind-pruned-rocksdb-trace}:/data
      - .jwtsecret:/jwtsecret:ro
      - /slowdisk:/slowdisk
    logging: *logging-defaults
@@ -85,45 +85,45 @@ services:
      - prometheus-scrape.port=9091
      - prometheus-scrape.path=/metrics
      - traefik.enable=true
-      - traefik.http.middlewares.ethereum-hoodi-nethermind-pruned-rocksdb-trace-stripprefix.stripprefix.prefixes=/ethereum-hoodi-nethermind
-      - traefik.http.services.ethereum-hoodi-nethermind-pruned-rocksdb-trace.loadbalancer.server.port=8545
-      - ${NO_SSL:-traefik.http.routers.ethereum-hoodi-nethermind-pruned-rocksdb-trace.entrypoints=websecure}
-      - ${NO_SSL:-traefik.http.routers.ethereum-hoodi-nethermind-pruned-rocksdb-trace.tls.certresolver=myresolver}
-      - ${NO_SSL:-traefik.http.routers.ethereum-hoodi-nethermind-pruned-rocksdb-trace.rule=Host(`$DOMAIN`) && (Path(`/ethereum-hoodi-nethermind`) || Path(`/ethereum-hoodi-nethermind/`))}
-      - ${NO_SSL:+traefik.http.routers.ethereum-hoodi-nethermind-pruned-rocksdb-trace.rule=Path(`/ethereum-hoodi-nethermind`) || Path(`/ethereum-hoodi-nethermind/`)}
-      - traefik.http.routers.ethereum-hoodi-nethermind-pruned-rocksdb-trace.middlewares=ethereum-hoodi-nethermind-pruned-rocksdb-trace-stripprefix, ipallowlist
+      - traefik.http.middlewares.ethereum-hoodie-nethermind-pruned-rocksdb-trace-stripprefix.stripprefix.prefixes=/ethereum-hoodie-nethermind
+      - traefik.http.services.ethereum-hoodie-nethermind-pruned-rocksdb-trace.loadbalancer.server.port=8545
+      - ${NO_SSL:-traefik.http.routers.ethereum-hoodie-nethermind-pruned-rocksdb-trace.entrypoints=websecure}
+      - ${NO_SSL:-traefik.http.routers.ethereum-hoodie-nethermind-pruned-rocksdb-trace.tls.certresolver=myresolver}
+      - ${NO_SSL:-traefik.http.routers.ethereum-hoodie-nethermind-pruned-rocksdb-trace.rule=Host(`$DOMAIN`) && (Path(`/ethereum-hoodie-nethermind`) || Path(`/ethereum-hoodie-nethermind/`))}
+      - ${NO_SSL:+traefik.http.routers.ethereum-hoodie-nethermind-pruned-rocksdb-trace.rule=Path(`/ethereum-hoodie-nethermind`) || Path(`/ethereum-hoodie-nethermind/`)}
+      - traefik.http.routers.ethereum-hoodie-nethermind-pruned-rocksdb-trace.middlewares=ethereum-hoodie-nethermind-pruned-rocksdb-trace-stripprefix, ipallowlist

-  ethereum-hoodi-nethermind-node:
-    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_HOODI_NIMBUS_VERSION:-multiarch-v26.7.0}
+  ethereum-hoodie-nethermind-node:
+    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_HOODIE_NIMBUS_VERSION:-multiarch-v26.6.2}
    user: root
    ports:
-      - 15786:15786
-      - 15786:15786/udp
+      - 16214:16214
+      - 16214:16214/udp
    expose:
      - 3500
-    entrypoint: /bin/sh -c '/home/user/nimbus-eth2/build/nimbus_beacon_node trustedNodeSync --network=hoodi --trusted-node-url=https://beaconstate-hoodi.chainsafe.io --backfill=false; exec /home/user/nimbus-eth2/build/nimbus_beacon_node "$@"' --
+    entrypoint: /bin/sh -c '/home/user/nimbus-eth2/build/nimbus_beacon_node trustedNodeSync --network=hoodie --trusted-node-url= --backfill=false; exec /home/user/nimbus-eth2/build/nimbus_beacon_node "$@"' --
    command:
      - --history=prune
      - --jwt-secret=/jwtsecret
      - --metrics-address=0.0.0.0
      - --metrics-port=8008
      - --nat=extip:${IP}
-      - --network=hoodi
+      - --network=hoodie
      - --rest
      - --rest-address=0.0.0.0
      - --rest-port=3500
-      - --tcp-port=15786
-      - --udp-port=15786
-      - --web3-url=http://ethereum-hoodi-nethermind:8551
+      - --tcp-port=16214
+      - --udp-port=16214
+      - --web3-url=http://ethereum-hoodie-nethermind:8551
    restart: unless-stopped
    depends_on:
-      ethereum-hoodi-nethermind:
+      ethereum-hoodie-nethermind:
        condition: service_started
        restart: true
    networks:
      - chains
    volumes:
-      - ${ETHEREUM_HOODI_NETHERMIND_PRUNED_ROCKSDB_TRACE__NIMBUS_DATA:-ethereum-hoodi-nethermind-pruned-rocksdb-trace_nimbus}:/root/.cache/nimbus/BeaconNode
+      - ${ETHEREUM_HOODIE_NETHERMIND_PRUNED_ROCKSDB_TRACE__NIMBUS_DATA:-ethereum-hoodie-nethermind-pruned-rocksdb-trace_nimbus}:/root/.cache/nimbus/BeaconNode
      - .jwtsecret:/jwtsecret:ro
    logging: *logging-defaults
    labels:
@@ -131,17 +131,17 @@ services:
      - prometheus-scrape.port=8008
      - prometheus-scrape.path=/metrics
      - traefik.enable=true
-      - traefik.http.middlewares.ethereum-hoodi-nethermind-pruned-rocksdb-trace-node-stripprefix.stripprefix.prefixes=/ethereum-hoodi-nethermind
-      - traefik.http.services.ethereum-hoodi-nethermind-pruned-rocksdb-trace-node.loadbalancer.server.port=3500
-      - ${NO_SSL:-traefik.http.routers.ethereum-hoodi-nethermind-pruned-rocksdb-trace-node.entrypoints=websecure}
-      - ${NO_SSL:-traefik.http.routers.ethereum-hoodi-nethermind-pruned-rocksdb-trace-node.tls.certresolver=myresolver}
-      - ${NO_SSL:-traefik.http.routers.ethereum-hoodi-nethermind-pruned-rocksdb-trace-node.rule=Host(`$DOMAIN`) && PathPrefix(`/ethereum-hoodi-nethermind/eth`)}
-      - ${NO_SSL:+traefik.http.routers.ethereum-hoodi-nethermind-pruned-rocksdb-trace-node.rule=PathPrefix(`/ethereum-hoodi-nethermind/eth`)}
-      - traefik.http.routers.ethereum-hoodi-nethermind-pruned-rocksdb-trace-node.middlewares=ethereum-hoodi-nethermind-pruned-rocksdb-trace-node-stripprefix, ipallowlist
+      - traefik.http.middlewares.ethereum-hoodie-nethermind-pruned-rocksdb-trace-node-stripprefix.stripprefix.prefixes=/ethereum-hoodie-nethermind
+      - traefik.http.services.ethereum-hoodie-nethermind-pruned-rocksdb-trace-node.loadbalancer.server.port=3500
+      - ${NO_SSL:-traefik.http.routers.ethereum-hoodie-nethermind-pruned-rocksdb-trace-node.entrypoints=websecure}
+      - ${NO_SSL:-traefik.http.routers.ethereum-hoodie-nethermind-pruned-rocksdb-trace-node.tls.certresolver=myresolver}
+      - ${NO_SSL:-traefik.http.routers.ethereum-hoodie-nethermind-pruned-rocksdb-trace-node.rule=Host(`$DOMAIN`) && PathPrefix(`/ethereum-hoodie-nethermind/eth`)}
+      - ${NO_SSL:+traefik.http.routers.ethereum-hoodie-nethermind-pruned-rocksdb-trace-node.rule=PathPrefix(`/ethereum-hoodie-nethermind/eth`)}
+      - traefik.http.routers.ethereum-hoodie-nethermind-pruned-rocksdb-trace-node.middlewares=ethereum-hoodie-nethermind-pruned-rocksdb-trace-node-stripprefix, ipallowlist

 volumes:
-  ethereum-hoodi-nethermind-pruned-rocksdb-trace:
-  ethereum-hoodi-nethermind-pruned-rocksdb-trace_nimbus:
+  ethereum-hoodie-nethermind-pruned-rocksdb-trace:
+  ethereum-hoodie-nethermind-pruned-rocksdb-trace_nimbus:

 x-upstreams:
  - id: $${ID}
@@ -155,7 +155,7 @@ x-upstreams:
          frameSize: 20Mb
          msgSize: 50Mb
          url: $${WS_URL}
-    chain: hoodi
+    chain: ethereum
    method-groups:
      enabled:
        - debug
@@ -166,18 +166,11 @@ x-upstreams:
      enabled:
        - name: txpool_content # TODO: should be disabled for rollup nodes
  - id: $${ID}-beacon-chain
-    chain: eth-beacon-chain-hoodi
+    chain: eth-beacon-chain-hoodie
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-hoodi-nethermind-pruned-rocksdb-trace_nimbus]
 ...
--- a/ethereum/nethermind/ethereum-mainnet-nethermind-pruned-rocksdb-trace--nimbus.yml
+++ b/ethereum/nethermind/ethereum-mainnet-nethermind-pruned-rocksdb-trace--nimbus.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-mainnet-nethermind:
-    image: ${ETHEREUM_NETHERMIND_IMAGE:-nethermind/nethermind}:${ETHEREUM_MAINNET_NETHERMIND_VERSION:-1.39.1}
+    image: ${ETHEREUM_NETHERMIND_IMAGE:-nethermind/nethermind}:${ETHEREUM_MAINNET_NETHERMIND_VERSION:-1.37.2}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -94,7 +94,7 @@ services:
      - traefik.http.routers.ethereum-mainnet-nethermind-pruned-rocksdb-trace.middlewares=ethereum-mainnet-nethermind-pruned-rocksdb-trace-stripprefix, ipallowlist

  ethereum-mainnet-nethermind-node:
-    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_MAINNET_NIMBUS_VERSION:-multiarch-v26.7.0}
+    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_MAINNET_NIMBUS_VERSION:-multiarch-v26.6.2}
    user: root
    ports:
      - 17065:17065
@@ -169,15 +169,8 @@ x-upstreams:
    chain: eth-beacon-chain
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-mainnet-nethermind-pruned-rocksdb-trace_nimbus]
 ...
--- a/ethereum/nethermind/ethereum-sepolia-nethermind-pruned-rocksdb-trace--nimbus.yml
+++ b/ethereum/nethermind/ethereum-sepolia-nethermind-pruned-rocksdb-trace--nimbus.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-sepolia-nethermind:
-    image: ${ETHEREUM_NETHERMIND_IMAGE:-nethermind/nethermind}:${ETHEREUM_SEPOLIA_NETHERMIND_VERSION:-1.39.1}
+    image: ${ETHEREUM_NETHERMIND_IMAGE:-nethermind/nethermind}:${ETHEREUM_SEPOLIA_NETHERMIND_VERSION:-1.37.2}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -94,7 +94,7 @@ services:
      - traefik.http.routers.ethereum-sepolia-nethermind-pruned-rocksdb-trace.middlewares=ethereum-sepolia-nethermind-pruned-rocksdb-trace-stripprefix, ipallowlist

  ethereum-sepolia-nethermind-node:
-    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_SEPOLIA_NIMBUS_VERSION:-multiarch-v26.7.0}
+    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_SEPOLIA_NIMBUS_VERSION:-multiarch-v26.6.2}
    user: root
    ports:
      - 15835:15835
@@ -169,15 +169,8 @@ x-upstreams:
    chain: eth-beacon-chain-sepolia
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-sepolia-nethermind-pruned-rocksdb-trace_nimbus]
 ...
--- a/ethereum/reth/ethereum-hoodi-reth-archive-trace.yml
+++ b/ethereum/reth/ethereum-hoodi-reth-archive-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-hoodi-reth:
-    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_HOODI_RETH_VERSION:-v2.4.1}
+    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_HOODI_RETH_VERSION:-v2.1.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -108,7 +108,7 @@ services:
    shm_size: 2gb

  ethereum-hoodi-reth-node:
-    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_HOODI_PRYSM_VERSION:-v7.1.7}
+    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_HOODI_PRYSM_VERSION:-v7.1.4}
    ports:
      - 15606:15606
      - 15606:15606/udp
@@ -184,15 +184,8 @@ x-upstreams:
    chain: eth-beacon-chain-hoodi
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-hoodi-reth-archive-trace_prysm]
 ...
--- a/ethereum/reth/ethereum-hoodi-reth-pruned-trace.yml
+++ b/ethereum/reth/ethereum-hoodi-reth-pruned-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-hoodi-reth-pruned:
-    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_HOODI_RETH_VERSION:-v2.4.1}
+    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_HOODI_RETH_VERSION:-v2.1.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -109,7 +109,7 @@ services:
    shm_size: 2gb

  ethereum-hoodi-reth-pruned-node:
-    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_HOODI_PRYSM_VERSION:-v7.1.7}
+    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_HOODI_PRYSM_VERSION:-v7.1.4}
    ports:
      - 17435:17435
      - 17435:17435/udp
@@ -185,15 +185,8 @@ x-upstreams:
    chain: eth-beacon-chain-hoodi
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-hoodi-reth-pruned-trace_prysm]
 ...
--- a/ethereum/reth/ethereum-mainnet-reth-archive-trace--lighthouse-pruned-blobs.yml
+++ b/ethereum/reth/ethereum-mainnet-reth-archive-trace--lighthouse-pruned-blobs.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-mainnet-reth:
-    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_MAINNET_RETH_VERSION:-v2.4.1}
+    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_MAINNET_RETH_VERSION:-v2.1.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -108,7 +108,7 @@ services:
    shm_size: 2gb

  ethereum-mainnet-reth-node:
-    image: ${ETHEREUM_LIGHTHOUSE_IMAGE:-sigp/lighthouse}:${ETHEREUM_MAINNET_LIGHTHOUSE_VERSION:-v8.2.1}
+    image: ${ETHEREUM_LIGHTHOUSE_IMAGE:-sigp/lighthouse}:${ETHEREUM_MAINNET_LIGHTHOUSE_VERSION:-v8.2.0}
    ports:
      - 19563:19563
      - 19563:19563/udp
@@ -191,15 +191,8 @@ x-upstreams:
    chain: eth-beacon-chain
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-mainnet-reth-archive-trace_lighthouse-pruned-blobs]
 ...
--- a/ethereum/reth/ethereum-mainnet-reth-archive-trace--nimbus.yml
+++ b/ethereum/reth/ethereum-mainnet-reth-archive-trace--nimbus.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-mainnet-reth:
-    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_MAINNET_RETH_VERSION:-v2.4.1}
+    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_MAINNET_RETH_VERSION:-v2.1.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -108,7 +108,7 @@ services:
    shm_size: 2gb

  ethereum-mainnet-reth-node:
-    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_MAINNET_NIMBUS_VERSION:-multiarch-v26.7.0}
+    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_MAINNET_NIMBUS_VERSION:-multiarch-v26.6.2}
    user: root
    ports:
      - 19563:19563
@@ -183,15 +183,8 @@ x-upstreams:
    chain: eth-beacon-chain
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-mainnet-reth-archive-trace_nimbus]
 ...
--- a/ethereum/reth/ethereum-mainnet-reth-archive-trace.yml
+++ b/ethereum/reth/ethereum-mainnet-reth-archive-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-mainnet-reth:
-    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_MAINNET_RETH_VERSION:-v2.4.1}
+    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_MAINNET_RETH_VERSION:-v2.1.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -108,7 +108,7 @@ services:
    shm_size: 2gb

  ethereum-mainnet-reth-node:
-    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_MAINNET_PRYSM_VERSION:-v7.1.7}
+    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_MAINNET_PRYSM_VERSION:-v7.1.6}
    ports:
      - 19563:19563
      - 19563:19563/udp
@@ -184,15 +184,8 @@ x-upstreams:
    chain: eth-beacon-chain
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-mainnet-reth-archive-trace_prysm]
 ...
--- a/ethereum/reth/ethereum-mainnet-reth-minimal-trace--blsync.yml
+++ b/ethereum/reth/ethereum-mainnet-reth-minimal-trace--blsync.yml
@@ -33,7 +33,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-mainnet-reth-minimal:
-    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_MAINNET_RETH_VERSION:-v2.4.1}
+    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_MAINNET_RETH_VERSION:-v2.1.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
--- a/ethereum/reth/ethereum-mainnet-reth-minimal-trace--nimbus.yml
+++ b/ethereum/reth/ethereum-mainnet-reth-minimal-trace--nimbus.yml
@@ -52,7 +52,7 @@ services:
      args:
        LLVM_IMAGE: ${LLVM_IMAGE:-snowstep/llvm}
        LLVM_VERSION: ${LLVM_VERSION:-20250912105042}
-        RETH_VERSION: ${ETHEREUM_MAINNET_RETH_VERSION:-v2.4.1}
+        RETH_VERSION: ${ETHEREUM_MAINNET_RETH_VERSION:-v2.1.0}
        RETH_REPO: ${ETHEREUM_MAINNET_RETH_REPO:-https://github.com/paradigmxyz/reth}
        ARCH_TARGET: ${ARCH_TARGET:-native}
        PROFILE: ${RETH_BUILD_PROFILE:-maxperf}
@@ -145,7 +145,7 @@ services:
      - pruning

  ethereum-mainnet-reth-minimal-node:
-    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_MAINNET_NIMBUS_VERSION:-multiarch-v26.7.0}
+    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_MAINNET_NIMBUS_VERSION:-multiarch-v26.6.2}
    user: root
    ports:
      - 19286:19286
@@ -242,15 +242,8 @@ x-upstreams:
    chain: eth-beacon-chain
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-mainnet-reth-minimal-trace_nimbus]
 ...
--- a/ethereum/reth/ethereum-mainnet-reth-pruned-trace--lighthouse.yml
+++ b/ethereum/reth/ethereum-mainnet-reth-pruned-trace--lighthouse.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-mainnet-reth-pruned:
-    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_MAINNET_RETH_VERSION:-v2.4.1}
+    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_MAINNET_RETH_VERSION:-v2.1.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -109,7 +109,7 @@ services:
    shm_size: 2gb

  ethereum-mainnet-reth-pruned-node:
-    image: ${ETHEREUM_LIGHTHOUSE_IMAGE:-sigp/lighthouse}:${ETHEREUM_MAINNET_LIGHTHOUSE_VERSION:-v8.2.1}
+    image: ${ETHEREUM_LIGHTHOUSE_IMAGE:-sigp/lighthouse}:${ETHEREUM_MAINNET_LIGHTHOUSE_VERSION:-v8.2.0}
    ports:
      - 15150:15150
      - 15150:15150/udp
@@ -190,15 +190,8 @@ x-upstreams:
    chain: eth-beacon-chain
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-mainnet-reth-pruned-trace_lighthouse]
 ...
--- a/ethereum/reth/ethereum-mainnet-reth-pruned-trace--nimbus.yml
+++ b/ethereum/reth/ethereum-mainnet-reth-pruned-trace--nimbus.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-mainnet-reth-pruned:
-    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_MAINNET_RETH_VERSION:-v2.4.1}
+    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_MAINNET_RETH_VERSION:-v2.1.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -109,7 +109,7 @@ services:
    shm_size: 2gb

  ethereum-mainnet-reth-pruned-node:
-    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_MAINNET_NIMBUS_VERSION:-multiarch-v26.7.0}
+    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_MAINNET_NIMBUS_VERSION:-multiarch-v26.6.2}
    user: root
    ports:
      - 15150:15150
@@ -184,15 +184,8 @@ x-upstreams:
    chain: eth-beacon-chain
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-mainnet-reth-pruned-trace_nimbus]
 ...
--- a/ethereum/reth/ethereum-mainnet-reth-pruned-trace.yml
+++ b/ethereum/reth/ethereum-mainnet-reth-pruned-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-mainnet-reth-pruned:
-    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_MAINNET_RETH_VERSION:-v2.4.1}
+    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_MAINNET_RETH_VERSION:-v2.1.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -109,7 +109,7 @@ services:
    shm_size: 2gb

  ethereum-mainnet-reth-pruned-node:
-    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_MAINNET_PRYSM_VERSION:-v7.1.7}
+    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_MAINNET_PRYSM_VERSION:-v7.1.6}
    ports:
      - 15150:15150
      - 15150:15150/udp
@@ -185,15 +185,8 @@ x-upstreams:
    chain: eth-beacon-chain
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-mainnet-reth-pruned-trace_prysm]
 ...
--- a/ethereum/reth/ethereum-sepolia-reth-archive-trace--nimbus.yml
+++ b/ethereum/reth/ethereum-sepolia-reth-archive-trace--nimbus.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-sepolia-reth:
-    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_SEPOLIA_RETH_VERSION:-v2.4.1}
+    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_SEPOLIA_RETH_VERSION:-v2.1.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -108,7 +108,7 @@ services:
    shm_size: 2gb

  ethereum-sepolia-reth-node:
-    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_SEPOLIA_NIMBUS_VERSION:-multiarch-v26.7.0}
+    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_SEPOLIA_NIMBUS_VERSION:-multiarch-v26.6.2}
    user: root
    ports:
      - 19330:19330
@@ -183,15 +183,8 @@ x-upstreams:
    chain: eth-beacon-chain-sepolia
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-sepolia-reth-archive-trace_nimbus]
 ...
--- a/ethereum/reth/ethereum-sepolia-reth-archive-trace.yml
+++ b/ethereum/reth/ethereum-sepolia-reth-archive-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-sepolia-reth:
-    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_SEPOLIA_RETH_VERSION:-v2.4.1}
+    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_SEPOLIA_RETH_VERSION:-v2.1.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -108,7 +108,7 @@ services:
    shm_size: 2gb

  ethereum-sepolia-reth-node:
-    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_SEPOLIA_PRYSM_VERSION:-v7.1.7}
+    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_SEPOLIA_PRYSM_VERSION:-v7.1.4}
    ports:
      - 19330:19330
      - 19330:19330/udp
@@ -184,15 +184,8 @@ x-upstreams:
    chain: eth-beacon-chain-sepolia
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-sepolia-reth-archive-trace_prysm]
 ...
--- a/ethereum/reth/ethereum-sepolia-reth-pruned-trace--nimbus.yml
+++ b/ethereum/reth/ethereum-sepolia-reth-pruned-trace--nimbus.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-sepolia-reth-pruned:
-    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_SEPOLIA_RETH_VERSION:-v2.4.1}
+    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_SEPOLIA_RETH_VERSION:-v2.1.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -109,7 +109,7 @@ services:
    shm_size: 2gb

  ethereum-sepolia-reth-pruned-node:
-    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_SEPOLIA_NIMBUS_VERSION:-multiarch-v26.7.0}
+    image: ${ETHEREUM_NIMBUS_IMAGE:-statusim/nimbus-eth2}:${ETHEREUM_SEPOLIA_NIMBUS_VERSION:-multiarch-v26.6.2}
    user: root
    ports:
      - 17150:17150
@@ -184,15 +184,8 @@ x-upstreams:
    chain: eth-beacon-chain-sepolia
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-sepolia-reth-pruned-trace_nimbus]
 ...
--- a/ethereum/reth/ethereum-sepolia-reth-pruned-trace.yml
+++ b/ethereum/reth/ethereum-sepolia-reth-pruned-trace.yml
@@ -30,7 +30,7 @@ x-logging-defaults: &logging-defaults

 services:
  ethereum-sepolia-reth-pruned:
-    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_SEPOLIA_RETH_VERSION:-v2.4.1}
+    image: ${ETHEREUM_RETH_IMAGE:-ghcr.io/paradigmxyz/reth}:${ETHEREUM_SEPOLIA_RETH_VERSION:-v2.1.0}
    sysctls:
      # TCP Performance
      net.ipv4.tcp_slow_start_after_idle: 0       # Disable slow start after idle
@@ -109,7 +109,7 @@ services:
    shm_size: 2gb

  ethereum-sepolia-reth-pruned-node:
-    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_SEPOLIA_PRYSM_VERSION:-v7.1.7}
+    image: ${ETHEREUM_PRYSM_IMAGE:-prysmaticlabs/prysm-beacon-chain}:${ETHEREUM_SEPOLIA_PRYSM_VERSION:-v7.1.4}
    ports:
      - 17150:17150
      - 17150:17150/udp
@@ -185,15 +185,8 @@ x-upstreams:
    chain: eth-beacon-chain-sepolia
    labels:
      provider: $${PROVIDER}-beacon-chain
-    options:
-      # dshackle 0.79.10's beacon health validator times out on the spec-compliant
-      # empty-body 200 from /eth/v1/node/health (nimbus), flapping the upstream
-      # UNAVAILABLE and failing live requests ("Source was empty"). Head tracking
-      # still governs health with validation off. 2026-07-10, dRPC incident.
-      disable-validation: true
    connection:
      generic:
        rpc:
          url: $${RPC_URL}
-x-optional-volumes: [ethereum-sepolia-reth-pruned-trace_prysm]
 ...
--- a/force-recreate.sh
+++ b/force-recreate.sh
@@ -1,31 +1,8 @@
 #!/bin/bash
-# force-recreate.sh — recreate one node's compose services (keeps volumes).
-# Runs peer-capture (.before-stop) before and peer-reinject (.after-start) after
-# so EL peer sets survive the restart (lisk-class --disable-discovery fix).

 if [ -z "$1" ] || [ ! -f "/root/rpc/$1.yml" ]; then
    echo "Error: Either no argument provided or /root/rpc/$1.yml does not exist."
    exit 1
 fi

-COMPOSE_PATH="$1"
-BASEPATH="/root/rpc"
-cd "$BASEPATH" || exit 1
-
-run_hook() {
-    local kind="$1"   # before-stop | after-start
-    local generic="$2"
-    if [ -f "${BASEPATH}/${COMPOSE_PATH}.${kind}" ]; then
-        /bin/bash "${BASEPATH}/${COMPOSE_PATH}.${kind}" || \
-            echo "WARN: ${COMPOSE_PATH}.${kind} exited $?" >&2
-    elif [ -x "${BASEPATH}/${generic}" ]; then
-        "${BASEPATH}/${generic}" "$COMPOSE_PATH" || \
-            echo "WARN: ${generic} exited $?" >&2
-    fi
-}
-
-run_hook before-stop peer-capture.sh
-
-docker compose up -d --force-recreate $(cat "/root/rpc/${COMPOSE_PATH}.yml" | yaml2json - | jq '.services' | jq -r 'keys[]' | tr '\n' ' ')
-
-run_hook after-start peer-reinject.sh
+docker compose up -d --force-recreate $(cat /root/rpc/$1.yml | yaml2json - | jq '.services' | jq -r 'keys[]' | tr '\n' ' ')
--- a/fuse/nethermind/fuse-spark-nethermind-archive-rocksdb-trace.yml
+++ b/fuse/nethermind/fuse-spark-nethermind-archive-rocksdb-trace.yml
@@ -96,8 +96,26 @@ services:
 volumes:
  fuse-spark-nethermind-archive-rocksdb-trace:

-# fuse-spark (Sparknet, chainid 123) is ABSENT from dRPC chains.yaml - not a
-# servable dRPC chain. x-upstreams removed 2026-08-05 (it declared the MAINNET
-# slug "fuse", which would have advertised testnet data as mainnet). This file is
-# hand-written (fuse has chains: null in context.yml); onboarding it to generation
-# is the clean long-term fix. See chain-aliases.yaml fuse/spark: null.
+x-upstreams:
+  - id: $${ID}
+    labels:
+      provider: $${PROVIDER}
+    connection:
+      generic:
+        rpc:
+          url: $${RPC_URL}
+        ws:
+          frameSize: 20Mb
+          msgSize: 50Mb
+          url: $${WS_URL}
+    chain: fuse
+    method-groups:
+      enabled:
+        - debug
+        - filter
+        - trace
+    methods:
+      disabled:
+      enabled:
+        - name: txpool_content # TODO: should be disabled for rollup nodes
+...
--- a/fuse/nethermind/fuse-spark-nethermind-minimal-rocksdb-trace.yml
+++ b/fuse/nethermind/fuse-spark-nethermind-minimal-rocksdb-trace.yml
@@ -99,8 +99,26 @@ services:
 volumes:
  fuse-spark-nethermind-minimal-rocksdb-trace:

-# fuse-spark (Sparknet, chainid 123) is ABSENT from dRPC chains.yaml - not a
-# servable dRPC chain. x-upstreams removed 2026-08-05 (it declared the MAINNET
-# slug "fuse", which would have advertised testnet data as mainnet). This file is
-# hand-written (fuse has chains: null in context.yml); onboarding it to generation
-# is the clean long-term fix. See chain-aliases.yaml fuse/spark: null.
+x-upstreams:
+  - id: $${ID}
+    labels:
+      provider: $${PROVIDER}
+    connection:
+      generic:
+        rpc:
+          url: $${RPC_URL}
+        ws:
+          frameSize: 20Mb
+          msgSize: 50Mb
+          url: $${WS_URL}
+    chain: fuse
+    method-groups:
+      enabled:
+        - debug
+        - filter
+        - trace
+    methods:
+      disabled:
+      enabled:
+        - name: txpool_content # TODO: should be disabled for rollup nodes
+...
--- a/Show More
+++ b/Show More